Panasonic Toughbook CF-31AAA7J1M Reference Manual page 73

LAN
Power On by LAN/Wake Up from Wired LAN
NOTE
With this function enabled, power is consumed even if the computer is in sleep
to use the AC adaptor.
Even when a password is set in the Setup Utility and [Password On Boot] or [Password On Resume] is set to
[Enabled], entering the password is unnecessary for turning on or resuming the computer.
Connect the AC adaptor.
The Power On by LAN function is off under the following conditions:
• When you turn the computer off by sliding the power switch for 4 seconds or longer (e.g., after a hung-up).
• When you reattach the AC adaptor and battery pack to the computer after removing them.
The screen remains dark when the computer resumes from sleep
you touch the keyboard, touch pad or touchscreen (only for model with touchscreen).
*1
Windows XP: standby
Enabling the Power On by LAN function
The computer automatically turns from off to on when the computer is accessed from the network server via the internal LAN
port.
1
Select [Allow] in [Power On by LAN] in the [Advanced] menu of the Setup Utility
( page 100).
2
In [Caution], press
3
Press , and then select [Yes] and press
F10
4
Log on to Windows as an administrator.
5
Click (Start) - [Computer] - [System properties] - [Device Manager], and double-click
[Network adapters] - [Intel(R) 82579LM Gigabit Network Connection], and then click
[Advanced].
.
Enter
*1
, hibernation, or powered off. Be sure
*1
. The previous screen display will be restored when
.
Enter
73