Panasonic Toughbook CF-31AAA7J1M Reference Manual page 126

Troubleshooting (Advanced)
Wireless Communication (only for model with wireless LAN/wireless WAN)
Cannot connect to a network.
Access point is not detected.
Slide the wireless switch to turn on the wireless devices.
Set the devices ([Wireless LAN] / [Wireless WAN]) to [Enabled] in the
[Advanced] menu of the Setup Utility (
Disable the Wireless Connection Disable Utility (
Restart the computer.
Shorten the distance between the computer and the access point, and try the
detection again.
Confirm the following settings:
• [Wireless LAN] in the [Advanced] menu of the Setup Utility
Confirm that [Wireless LAN] is set to [Enabled] (
• Wireless Switch
Slide the wireless switch to ON.
• Wireless Switch Utility
Confirm that Wireless LAN is ON (
®
<For model with Intel
Confirm that /
If / / is not displayed on the notification area, turn on the wireless
communication ( page
<For model with Atheros AR928X>
Confirm that /
If / / /
wireless communication (
This computer uses channels 1 through 11
Check the channel being used by the access point.
*4
In the case of wireless communications, the frequency band being used can be divided
into segments, so that different communications can be conducted on each band
segment. A "Channel" refers to the individual frequency bandwidth divisions.
page 101).Restart the computer.
page 77).
®
Centrino Advanced N-6205>
/ is displayed on the notification area.
76).
/ / is displayed on the notification area.
is not displayed on the notification area, turn on the
page 76).
*4
when using IEEE802.11b/g.
126
page 78)
page 101).