Panasonic Toughbook CF-31AAA7J1M Reference Manual page 102

Setup Utility
Port Replicator USB Port
• If [Port Replicator USB Port] is set to [Disabled], the LAN port of port replicator or the car mounter is
also disabled.
Legacy USB Support
Boot Menu
Boot Mode
• Setting [Fast] will skip the [Panasonic] boot screen normally displayed immediately after the computer
is turned on. The time required to display the Windows boot screen will become shorter.
Since the [Panasonic] boot screen is not displayed, press and hold F2‚ or Del‚ and turn the computer
on to start the Setup Utility.
• If the startup from USB devices is not possible, set [Compatible] and retry. However, setting
[Compatible] will require longer time to display the Windows boot screen than setting [Normal].
• You can set [Fast] by using Quick Boot Manager (
Quick Boot Manager, [Boot Mode] returns to [Normal].
Boot Option Priorities
Boot Option #1
Boot Option #2
Boot Option #3
Boot Option #4
Boot Option #5
Boot Option #6
To change the boot order
The default order is [USB Floppy Disk
Press Enter on the boot device you want to change and select the boot device from the following menu.
• When a selected boot device in the following menu already exists in either of the [Boot Option (#1 to #6)], the boot
device appears at the newly selected position by switching the positions with the original boot device that existed before
at the position.
• When you select [Disabled] in the following menu, the disabled [Boot Option] is ignored and the boot device in the next [Boot
Option] operates.
page
*6
] [Hard Disk] [Optical Drive]
92). If you clear all settings in
[LAN] [USB Hard Disk]
102
Disabled
Enabled
Disabled
Enabled
Fast
Normal
Compatible
*6
USB Floppy Disk
Hard Disk
Optical Drive
LAN
USB Hard Disk
USB Optical Drive
[USB Optical Drive].