Disabling/Enabling Wireless Communication - Panasonic Toughbook CF-19KDRAG6B Reference Manual

Disabling/Enabling Wireless Communication

<Only for model with wireless LAN, and/or wireless WAN>
There are 5 ways of disabling and enabling wireless communication.
The wireless switch on the left side of the computer (below)
Wireless Switch Utility (
Settings in the Network and Sharing Center (
Settings in the [Advanced] menu of the Setup Utility (
Setting in the Wireless Connection Disable Utility (
NOTE
For further information about Wireless LAN: (
For further information about Wireless WAN: Refer to the instruction manual of the wireless device.
The wireless communication is also enabled or disabled by connecting or disconnecting the LAN cable. (
The Wireless Switch
1
Open the cover.
Slide the latch (A) to the right to unlock the cover.
A
Slide the latch (A) down, and open the cover.
B
2
To disable all wireless communication
Switch (B) to OFF
To enable wireless communication
Switch (B) to ON
In the default setting, the wireless switch enables all wireless devices when it is
set to ON.
To check the wireless communication status
1
Click on the notification area and place the cursor over the
Wireless Switch Utility icon (
A tool tip appears.
page 80)
page
page
or
83)
page 93)
page 81)
83)
).
79
page 81)