Disabling/Enabling Wireless Communication
<Only for model with wireless LAN and/or wireless WAN>
There are 4 ways of disabling and enabling wireless communication.
Wireless Switch Utility (
Settings in the Network and Sharing Center (
Settings in the [Advanced] menu of the Setup Utility (
Setting in the Wireless Connection Disable Utility (
NOTE
For further information about Wireless LAN:
For further information about Bluetooth:
For further information about Wireless WAN: Refer to the instruction manual of the wireless device.
Wireless Switch Utility
This utility allows you to enable or disable wireless devices from a pop-up menu in the notification area. In the default setting,
all wireless devices are enabled.
The Wireless Switch Utility icon
The icon appears when click
•
: Indicates that the wireless devices are enabled.
•
: Indicates that the wireless devices are off.
•
: Indicates that the wireless devices have been disabled in the Setup Utility.
To enable or disable particular wireless devices
1
Click the Wireless Switch Utility icon to show the pop-up menu.
2
Select ON or OFF for the device you want to enable or disable.
To check the wireless communication status
1
Place the cursor over the Wireless Switch Utility icon (
area.
A tool tip appears.
below
)
page
page 77
page 80
on the notification area. It shows the status of wireless devices.
77)
page
86)
page
75)
74
or
) on the notification