Panasonic Toughbook CF-18BCAGCMM Reference Manual page 77

Modem
Connecting the Internal Modem with a Telephone Jack
CAUTION
Do not use the PBX internal phone lines installed in company offices. Doing so may
lead to a fire or electric shock.
It is not possible to connect the modem to any of the following lines.
• Internal home phones
• Intercoms
• ISDN
Be sure to connect the modem telephone cable into the modem port, not into the LAN port.
1
Connect the computer and the telephone jack (A) using a modem
telephone cable (included)(B).
Open the modem cover, position the cable so that the tab (C) matches the port
and insert the cable until you hear a "click".
2
Change the settings as necessary.
A
Select [Edit] in [start] - [Control Panel] - [Printers and Other Hardware] -
[Phone and Modem Options] - [Dialing Rules], then select the location from
which you will be dialing in [Country/region].
B Input the necessary information (items such as the area code, dialing rules,
etc.), select [OK], then select [OK].
NOTE
Do not enter either the standby or hibernation mode during communications.
To remove the cable, pull out while pressing down on the tab.
<Modem-on-Hold function>
The modem of this computer has Modem-on-Hold function, which allows you to
receive an incoming call and stay connected to the internet (Call-Waiting service from
your phone company is required. Your Internet Service Provider (ISP) must also
support V.92).
To use this function:
A
Select [start] - [Run], input [c:\util\drivers\modem\ltmoh.exe] and then select [OK].
B
Select on the taskbar and make settings.
77
,