Panasonic Toughbook CF-18BCAGCMM Reference Manual page 14

Touch Pad
When you want to use an external mouse through the external keyboard/mouse port of
the port replicator (optional)
NOTE
Refer to [Mouse Properties] for information on basic operations other than the above.
To display [Mouse Properties]:
Select [start] - [Control Panel] - [Printers and Other Hardware] - [Mouse].
The operations of Scroll, Pan or Zoom will differ depending on the application. There
are cases the touch pad will not support these operations even with an application
that supports the functions.
The touch pad cannot be used in the Setup Utility.
When an external mouse or trackball with additional functions (e.g., wheel function) is
connected, a part or all of the additional functions may fail to operate. To use these additional
functions, perform the operation below.
When the operation below is performed, a part or all of the touch pad functions cannot be
used.
If you are using a USB mouse, the following operation is unnecessary.
1
Select [start] - [Control Panel] - [Performance and Maintenance] -
[System] - [Hardware] - [Device Manager] - [Mice and other pointing
devices].
2
Select [touchpad], then select [Update Driver] at [Driver].
3
Select [No, not this time], then select [Next].
4
Select [Install from a list or specific location] and select [Next].
5
Select [Don't search. I will choose driver to install.], then select [Next].
6
Select [PS/2 Compatible Mouse], then select [Next].
7
At the confirmation message, select [Yes].
14