Panasonic Toughbook CF-18BCAGCMM Reference Manual page 95

<Only for models with wireless LAN and/or Bluetooth>
Wireless Switch Utility
4
Follow the on-screen instructions.
When the installation is complete, restart the computer.
The Wireless Switch Utility icon will be displayed on the taskbar.
: when either the wireless LAN or Bluetooth is on
or
: when both the wireless LAN and Bluetooth are off
NOTE
When you uninstall the Wireless Switch Utility:
• Confirm that [Wireless LAN] is set to [Enable] in the Setup Utility.
Enabling/Disabling 802.11a
1
Select the Wireless Switch Utility icon (
2
To enable 802.11a:
A
Select [802.11a Enabled].
To disable 802.11a
A Select [802.11a Disabled].
To use 802.11a, turn wireless LAN on.
The Wireless Switch Utility icon (
LAN and Bluetooth are on or off. The icon will not change even when 802.11a is
enabled or disabled.
If 802.11a is enabled or disabled while the computer is connected to an
802.11b/g access point, the connection to the access point will be temporarily
interrupted.
:
or
95
or ) on the taskbar.
) indicates whether the wireless