Panasonic Toughbook CF-18BCAGCMM Reference Manual page 103

Setup Utility
NOTE
The Setup Utility screen cannot be displayed in simultaneous display.
By pressing Fn+F3, display destinations can be changed either external display or
the internal LCD.
When [Password on boot] in the Setup Utility is set to [Disable]:
• When the computer is started up, entering a password is not necessary.
• When the Setup Utility is started up:
The password becomes necessary. This alternative can prevent the contents of the
Setup Utility from being changed.
If you fail to press F2 at the right moment, the Setup Utility will not start up. In this
case, let the computer fully boot up, and then perform a shutdown or restart from
Windows.
To close the Setup Utility:
Press Esc.
A
Select the exiting method from the [Exit] menu and press Enter.
B
Select [Yes] and then press Enter.
C
103