Before Operating - DCS MO-24SS Use And Care Manual

• Before operating your new microwave oven make sure you read and understand this operation manual
completely.
• Before the oven can be used, follow these procedures:
1. Plug in the oven. Close the door. The oven display will show WELCOME PRESS CLEAR AND PRESS CLOCK.
2. Touch the STOP/CLEAR pad.
3. Set clock.
TO SET THE CLOCK
• Suppose you want to enter the correct time of day
12:30 (A.M. or P.M.).
P R O C E D U R E
TIMER
1
2
CLOCK
Touch TIMER/CLOCK pad
and number 2 pad.
2 1 2 3 0
Enter the correct time
of day by touching the
numbers in sequence.
TIMER
3
CLOCK
Touch TIMER/CLOCK
pad again.
This is a 12 hour clock. If you attempt to enter an
incorrect clock time,
ERROR
Touch the STOP/CLEAR pad and re-enter the time.
• If the electrical power supply to your microwave
oven should be interrupted, the display will inter-
mittently show WELCOME PRESS CLEAR AND PRESS
CLOCK after the power is reinstated. If this occurs
during cooking, the program will be erased. The time
of day will also be erased. Simply touch STOP/
CLEAR pad and reset the clock for the correct time
of day.
Befo re Ope rating
will appear.
:
D I S P L A Y
ENTER
TIME OF
DAY
12:30
12:30
will appear in the display.
STOP/CLEAR
Touch the STOP/CLEAR pad to:
1. Erase if you make a mistake during programming.
2. Cancel timer.
3. Stop the oven temporarily during cooking.
4. Return the time of day to the display.
5. Cancel a program during cooking, touch twice.
10