Set Up For Input Signals; Component / Rgb In Select; 3D Y/C Filter - Panasonic Viera TH-37PH10 Operating Instructions Manual

SET UP for Input Signals

COMPONENT / RGB IN SELECT

Select to match the signals from the source connected to the COMPONENT / RGB input terminals.
Y, P , P signals "COMPONENT"
B R
R, G, B, HD, VD signals
1
2
3
Notes:
• Selection may not be possible, depending on which optional board is installed.
• Make setting of the selected input terminal (SLOT1, SLOT2, SLOT3 or PC IN).
(Setting of SLOT3 is not available on TH-37PH10UK.)

3D Y/C FILTER

Select "SIGNAL" from the "SET UP" menu during VIDEO (S VIDEO) input signal mode.
("SIGNAL [VIDEO]" menu is displayed.)
1
2
Note:
When ON, this setting only affects NTSC input signals.
36
"RGB"
Press to display the SET UP menu.
Press to select the "COMPONENT / RGB-IN
SELECT".
Press to select the desired mode.
COMPONENT
Press to exit from adjust mode.
– For NTSC AV images
Press to select the "3D Y/C FILTER (NTSC)".
Press to set ON / OFF.
Press to exit from adjust mode.
RGB
SET UP
SIGNAL
COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL PC
POWER SAVE OFF
STANDBY SAVE OFF
POWER MANAGEMENT OFF
AUTO POWER OFF
OFF
ENGLISH ( US )
OSD LANGUAGE
SET UP
SIGNAL
COMPONENT/RGB-IN SELECT
RGB
INPUT LABEL PC
POWER SAVE OFF
STANDBY SAVE OFF
POWER MANAGEMENT
OFF
AUTO POWER OFF
OFF
ENGLISH ( US )
OSD LANGUAGE
Press ACTION ( ) button
[ VIDEO ]
SIGNAL
3D Y/C FILTER (NTSC) ON
COLOR SYSTEM AUTO
OFF
3 : 2 PULLDOWN
Panasonic AUTO (4 : 3) NORMAL
VIDEO NR OFF
1/2
1/2