Set Up For Input Signals; Component/Rgb In Select - Panasonic TH-50PHW3 Operating Instructions Manual

I SET UP for Input Signals
I
COMPONENT/RGB IN SELECT
Select to match the signals from the source connected to the COMPONENT/RGB input terminals.
Y, PB, PR signals _> "COMPONENT"
R, G, B, HD, VD signals c:_ "RGB"
1
E-----
SETUP
Q
Press to display the SET UP menu screen.
Press to select the "COMPONENT/RGB IN
SELECT".
Press to select the desired mode.
_ SETUP
COMPONENT/RGB4N SELECT
SIGNAL )
COSDLANGUAGE <]IEI_Lq_TB_ D)
RETURN
SELECT _
I COMPONENT _ RGB I
R
O-- Press to exit from adjust mode.
3D Y/C FILTER - For NTSC Video images
Select the SIGNAL from the "SET UP" menu during VIDEO input signal
mode. ("SIGNAL [VIDEO]" menu is displayed.)
Press to select the "3D Y/C FILTER (NTSC)"
Press to set ON/OFF.
_==SETUP
• COMPONENT/RGB-IN SELECT ]
• _J
SIGNAL
OSD LANGUAGE __ D)
o_
RETURN
_, Press (_ (store) button
R
O-- Press to exit from adjust mode.
SIGNAL [ VIDEO ]
3D Y/C FILTER(NTSC) QBI._
COLOR SYSTEM _b_
PanasonicAUTO (4:3) _
o_
C "'NGE _ (]_ @ RE TURN
SELECT
Note:
When on, this setting only affects NTSC input signals.
3O