Adjusting Pos. /Size - Panasonic Viera TH-37PH10 Operating Instructions Manual

Adjusting POS. /SIZE

1
2
3
4
Notes:
• Adjustment details are memorized separately for different input signal formats
(Adjustments for component signals are memorized for 525 (480) / 60i · 60p, 625
(575) / 50i · 50p, 1125 (1080) / 60i · 50i · 24p · 25p · 30p · 24sF, 1250 (1080) / 50i,
750 (720) / 60p · 50p each, and RGB/PC/Digital signals are memorized for each
frequency.)
• If a "Cue" or "Rew" signal from a VCR or DVD player is received, the picture position
will shift up or down. This picture position movement cannot be controlled by the
POS. /SIZE function.
• If adjusting the PICTURE V-POS / V-SIZE in Panasonic AUTO with FULL mode,
the adjustment is not memorized. When exiting the mode, the screen will return
to a former adjustment.
H-POS Adjust the horizontal position.
V-POS Adjust the vertical position.
CLOCK PHASE
(RGB/PC in mode)
Helpful Hint (
While the POS. /SIZE display is active, if either the N button on the remote control is pressed at any time or the ACTION
( ) button is pressed during "NORMALIZE", then all adjustment values are returned to the factory settings.
20
Press to display the POS. /SIZE menu.
Press to select H-POS / H-SIZE / V-POS / V-SIZE /
CLOCK PHASE.
Press to adjust POS. /SIZE.
Press to exit from adjust mode.
Eliminate the fl ickering and distortion.
/ Normalization)
NORMALIZE
H-SIZE Adjust the horizontal size.
V-SIZE Adjust the vertical size.
During "VIDEO (S VIDEO)",
"COMPONENT" and "Digital" input signal.
POS. /SIZE
NORMALIZE
NORMAL
0
H-POS
0
H-SIZE
0
V-POS
0
V-SIZE
During "RGB / PC" input signal.
POS. /SIZE
NORMALIZE NORMAL
0
H-POS
0
H-SIZE
0
V-POS
0
V-SIZE
0
CLOCK PHASE