Basic Controls - Panasonic Viera TH-37PH10 Operating Instructions Manual

Basic Controls

Remote control sensor
Main Power On / Off Switch
Power Indicator
The Power Indicator will light.
• Power-OFF .... Indicator not illuminated (The unit
will still consume some power
as long as the power cord is still
inserted into the wall outlet.)
• Standby ......... Red
• Power-ON ...... Green
• DPMS ............. Orange (With PC input signal
and during operation of PC's
screensaver.)
SURROUND button
The surround setting switches on and off each time
the SURROUND button is pressed.
The benefi ts of surround sound are enormous. You
can be completely enveloped in sound; just as if
you were at a concert hall or cinema.
Note:
The surround settings are memorized separately
for each AUDIO MENU (STANDARD, DYNAMIC,
CLEAR).
ON OFF
SURROUND ON
14
+
INPUT MENU -/ VOL /
MENU Screen ON / OFF
Each time the MENU button is pressed, the menu screen
will switch. (see page 16)
Normal Viewing
INPUT button
(INPUT1, INPUT2, INPUT3 and PC selection)
(see page 18)
N button (see page 20, 23, 24, 25)
POS. /SIZE button (see page 20)
PICTURE button (see page 23)
INPUT button
(INPUT1, INPUT2, INPUT3 and PC selection)
Press to select INPUT1, INPUT2, INPUT3 and PC input
SLOTS sequentially. (see page 18)
Sound mute On / Off (see page 25)
Numeric buttons (see page 35)
ASPECT button
Press to adjust the aspect. (see page 19)
MULTI Window buttons (see page 21)
Volume Adjustment
Volume Up "+" Down "–"
W h e n t h e m e n u s c r e e n i s
displayed:
"+" : press to move the cursor up
"–" : press to move the cursor down
(see page 16)
Enter / Aspect button
(see page 16, 19)
ENTER/
PICTURE
SOUND POS. /SIZE
SET UP