Panasonic Lumix DMC-FZ7 Operating Instructions Manual page 23

[BEEP]
MENU
Press [ ] to display the [SETUP] menu
SET
and select the item to set. (P20)
[ ]: No operation sound
[ ]: Soft operation sound
[ ]: Loud operation sound
• The [BEEP] setting also affects simple
mode [ ].
[SHUTTER]
MENU
Press [ ] to display the [SETUP] menu
SET
and select the item to set. (P20)
Set to select the volume of shutter sound.
[ ]: No shutter sound
[ ]: Soft shutter sound
[ ]: Loud shutter sound
[VOLUME]
MENU
Press [ ] to display the [SETUP] menu
SET
and select the item to set. (P20)
The volume of speakers can be adjusted in
7 steps from level 6 to 0.
• When you connect the camera to a TV,
the volume of the TV speakers does not
change.
[NO.RESET]
MENU
Press [ ] to display the [SETUP] menu
SET
and select the item to set. (P20)
Set this when you want the file number of
the next recording to start from 0001. (The
folder number is updated and the file
number starts from 0001.)
• A folder number between 100 and 999
can be assigned.
When the folder number reaches 999, the
number cannot be reset. We recommend
formatting the card after saving the data
on a PC or elsewhere.
• To reset the folder number to 100, format
(P97) the card first and then use this
function to reset the file number.
A reset screen for the folder number will
then appear. Select [YES] to reset the
folder number.
• Refer to P99 for detailed information about
the file number and the folder number.
• The [NO.RESET] setting also affects
simple mode [ ].
[RESET]
MENU
Press [ ] to display the [SETUP] menu
SET
and select the item to set. (P20)
The [REC] or [SETUP] menu settings are
reset to the initial settings.
• The birthday setting for [BABY1]/[BABY2]
(P64) in scene mode and the number of
days that have passed since the
departure date for [TRAVEL DATE] (P66)
are also reset when the [SETUP] menu
settings are reset. Also, [FAVORITE]
(P89) is fixed to [OFF] and
[ROTATE DISP.] (P89) is fixed to [ON].
• The folder number and the clock setting
are not changed.
[USB MODE]
MENU
Press [ ] to display the [SETUP] menu
SET
and select the item to set. (P20)
Select the USB communication system
after or before connecting the camera to
your PC or your printer with the USB
connection cable (supplied).
[ SELECT ON CONNECTION]:
Select either [PC] or [PictBridge (PTP)]
if you connected the camera to a PC or
a printer supporting PictBridge.
[ PC]:
Set after or before connecting to a PC.
[ PictBridge (PTP)]:
Set after or before connecting to a
printer supporting PictBridge.
• When [PC] is selected, the camera is
connected via the USB Mass Storage
communication system.
• When [PictBridge (PTP)] is selected, the
camera is connected via the PTP (Picture
Transfer Protocol) communication system.
Preparation
23
VQT0V63