Panasonic Lumix DMC-FZ7PP Service Manual
  1. Manuals
  2. Brands
  3. Panasonic Manuals
  4. Digital Camera
  5. Lumix DMC-FZ7PP
  6. Service manual
Panasonic Lumix DMC-FZ7PP Service Manual

Panasonic Lumix DMC-FZ7PP Service Manual

Digital camera
Hide thumbs
Table of Contents

Advertisement

Quick Links

DMC-FZ7PP
DMC-FZ7PL
DMC-FZ7EB
DMC-FZ7EE
DMC-FZ7EF
DMC-FZ7EG
DMC-FZ7EGM
DMC-FZ7GC
DMC-FZ7GD
DMC-FZ7GK
DMC-FZ7GN
DMC-FZ7GT
DMC-FZ7SG
Vol. 1
Colour
(S)...........Silver Type (except DMC-FZ7GD)
(K)...........Black Type (except DMC-FZ7SG)
© 2006 Matsushita Electric Industrial Co., Ltd. All
rights reserved. Unauthorized copying and distribu-
tion is a violation of law.
ORDER NO. DSC0602001CE
B26

Digital Camera

Advertisement

Table of Contents
loading

Related Manuals for Panasonic Lumix DMC-FZ7PP

Summary of Contents for Panasonic Lumix DMC-FZ7PP

  • Page 1: Digital Camera

    ORDER NO. DSC0602001CE Digital Camera DMC-FZ7PP DMC-FZ7PL DMC-FZ7EB DMC-FZ7EE DMC-FZ7EF DMC-FZ7EG DMC-FZ7EGM DMC-FZ7GC DMC-FZ7GD DMC-FZ7GK DMC-FZ7GN DMC-FZ7GT DMC-FZ7SG Vol. 1 Colour (S)...Silver Type (except DMC-FZ7GD) (K)...Black Type (except DMC-FZ7SG) © 2006 Matsushita Electric Industrial Co., Ltd. All rights reserved. Unauthorized copying and distribu- tion is a violation of law.

  • Page 2: Table Of Contents

    TABLE OF CONTENTS PAGE PAGE 1 Safety Precaution -------------------------------------------------3 1.1. General Guidelines ----------------------------------------3 1.2. Leakage Current Cold Check ---------------------------3 1.3. Leakage Current Hot Check (See Figure 1.)--------3 1.4. How to Discharge the Capacitor on Main PCB -----4 2 Warning --------------------------------------------------------------5 2.1.

  • Page 3: Safety Precaution

    1 Safety Precaution 1.1. General Guidelines 1.3. Leakage Current Hot Check 1. IMPORTANT SAFETY NOTICE (See Figure 1.) There are special components used in this equipment 1. Plug the AC cord directly into the AC outlet. Do not use which are important for safety. These parts are marked by an isolation transformer for this check.

  • Page 4: How To Discharge The Capacitor On Main Pcb

    1.4. How to Discharge the Capacitor on Main PCB • This unit equipped with two pieces of capacitors as flash charging capacitors. “Either one of the capacitor discharging operation” makes discharging for others as well. CAUTION: 1. Be sure to discharge the capacitor on MAIN PCB. 2.

  • Page 5: Warning

    2 Warning 2.1. Prevention of Electro Static Discharge (ESD) to Electrostatically Sensitive (ES) Devices Some semiconductor (solid state) devices can be damaged easily by static electricity. Such components commonly are called Elec- trostatically Sensitive (ES) Devices. The following techniques should be used to help reduce the incidence of component damage caused by electro static discharge (ESD).

  • Page 6: Caution For Ac Cord(For Eb/Gc

    A replacement fuse cover can be purchased from your local 2.3.2.3. How to Replace the Fuse Panasonic Dealer. 1. Remove the Fuse Cover with a screwdriver. If the fitted moulded plug is unsuitable for the socket outlet in your home then the fuse should be removed and the plug cut off and disposed of safety.

  • Page 7: How To Replace The Lithium Battery

    2.4. How to Replace the Lithium Battery 2.4.1. Replacement Procedure 1. Remove the MAIN PCB. (Refer to Disassembly Procedures.) 2. Remove the Lithium battery (Ref. No. “Z9101” at component side of MAIN PCB) and then replace it into new one. NOTE: This Lithium battery is a critical component.
  • Page 8 NOTE: Above caution is applicable for a battery pack which is for DMC-FZ7 series, as well.

  • Page 9: Service Navigation

    3 Service Navigation 3.1. Introduction This service manual contains technical information, which allow service personnel’s to understand and service this model. Please place orders using the parts list and not the drawing reference numbers. If the circuit is changed or modified, the information will be followed by service manual to be controlled with original service manual. 3.2.

  • Page 10: How To Define The Model Suffix (Ntsc Or Pal Model)

    3.4. How to Define the Model Suffix (NTSC or PAL model) There are seven kinds of DMC-FZ7, regardless of the colours. • a) DMC-FZ7S • b) DMC-FZ7PP • c) DMC-FZ7EB/EF/EG/EGM/GN • d) DMC-FZ7EE • e) DMC-FZ7GD • f) DMC-FZ7GT • g) DMC-FZ7PL/GC/GK/SG (DMC-FZ7S is exclusively Japan domestic model.) What is the difference is that the “INITIAL SETTINGS”...

  • Page 11: Initial Settings

    3.4.2. INITIAL SETTINGS: When you replace the Main PCB be sure to perform the initial settings after achieving the Adjustment, by ordering the following pro- cedure in accordance with model suffix. • Step 1. The temporary cancellation of factory setting: Set the mode dial to “[ P ]”.

  • Page 12: Specifications

    4 Specifications...

  • Page 13: Location Of Controls And Components

    5 Location of Controls and Components...

  • Page 14: Service Mode

    6 Service Mode 6.1. Error Code Memory Function 1. General description This unit is equipped with history of error code memory function, and can be memorized 32 error codes in sequence from the latest. When the error is occurred more than 32, the oldest error is overwritten in sequence. The error code is not memorized when the power supply is shut down forcibly (when the unit is powered on by the battery, the battery is pulled out) because the error code is memorized to FLASH ROM when the unit is powered off.
  • Page 15 Attribute Main item Sub item Error code Contents (Upper) High 4 bits Low 4 bits Check point (Lower) LENS Lens drive 1800 1000 PSD (X) error. Hall element (X axis) position detect error in OIS unit. OIS Unit 2000 PSD (Y) error. Hall element (Y axis) position detect error in OIS unit. OIS Unit 3000 GYRO (X) error.
  • Page 16 Attribute Main item Sub item Error code Contents (Upper) High 4 bits Low 4 bits Check point (Lower) SOFT Reset 3000 0001 NMI reset Non Mask-able Interrupt 0007 (30000001-30000007 are caused by factors) Card Card 3100 0001 Card logic error SD card data line or IC6001 (VENUS 2) 0002 Card physical error...

  • Page 17: Confirmation Of Firmware Version

    6.2. Confirmation of Firmware Version The Firmware version can be confirmed by ordering the following steps:. • Step 1. The temporary cancellation of factory setting: Set the mode dial to “[ P ]”. Insert the SD memory card which has a few photo data. While keep pressing [ Optical Image Stabilizer ] and “[ UP ] of Cross key”...

  • Page 18: Service Fixture & Tools

    7 Service Fixture & Tools 7.1. Service Fixture and Tools The following Service Fixture and tools are used for checking and servicing this unit.

  • Page 19: When Replacing The Main Pcb

    7.2. When Replacing the Main PCB After replacing the MAIN PCB, be sure to achieve adjustment. The adjustment instruction is available at “software download” on the “Support Information from NWBG/VDBG-PAVC” web-site in “TSN system”, together with Maintenance software. 7.3. Service Position This Service Position is used for checking and replacing parts.
  • Page 20 CAUTION-1. (When servicing MAIN PCB) 1. Be sure to discharge the capacitor on MAIN PCB. Refer to “HOW TO DISCHARGE THE CAPACITOR ON MAIN PCB”. The capacitor voltage is not lowered soon even if the AC Cord is unplugged or the battery is removed. 2.

  • Page 21: Disassembly And Assembly Instructions

    8 Disassembly and Assembly Instructions 8.1. Disassembly Flow Chart 8.2. PCB Location...

  • Page 22: Disassembly Procedure

    8.3. Disassembly Procedure 8.3.1. Removal of the Rear Case Unit Item Removal Rear Case Unit Fig. D1 Card Battery 4 Screws (A) 2 Screws (B) Fig. D2 P9001(Connector) FP9003(Flex) FP9006(Flex) Rear Case Unit Main P.C.B. Unit Fig. D3 2 Screws (C) Battery Frame Unit 1 Screw (D) Capacitor Holder...
  • Page 23 8.3.2. Removal of the Main P.C.B. Unit, Battery Frame Unit and Capacitor Holder Fig. D2 Fig. D3...
  • Page 24 • This unit equipped with two pieces of capacitors as flash 8.3.3. Removal of the LCD Unit charging capacitors. “Either one of the capacitor discharging operation” makes discharging for others as well. Fig. D5 8.3.4. Removal of the Speaker Fig. D6 Fig.
  • Page 25 8.3.5. Removal of the Jack Door Unit 8.3.7. Removal of the Top Operation Unit Fig. D9 Fig. D7 8.3.6. Removal of the AF LED/Mic P.C.B. Fig. D8...

  • Page 26: Removal Of The Ccd Unit

    8.3.8. Removal of the CCD Unit 8.3.9. Removal of the Flash Unit & EVF To prevent the CCD unit from catching the dust and dirt, do not Unit remove the CCD unit except for replacing. Fig. D11 8.3.10. Removal of the Lens Unit Fig.

  • Page 27: Disassembly/Assembly Procedure For The Lens

    8.4. Disassembly/Assembly Proce- 8.4.2. Removal of the 3rd Lens Frame/ 4th Lens Frame/Drive Frame Unit dure for the Lens NOTE: When Disassembling and Assembling for the Lens 1. To minimize the possibility of the CCD being dirt, perform disassemble and/or assemble under the condition of the CCD is being mounted.
  • Page 28 8.4.3. Removal of the Master Flange Unit 8.4.4. Removal of the Cam Frame...
  • Page 29 8.4.5. Removal of the Focus Motor Unit 8.4.6. Removal of the 4th Lens Frame Unit...
  • Page 30 8.4.7. Removal of the 3rd Lens Frame 8.4.8. Removal of the 2nd Lens Frame Unit Unit...

  • Page 31: Measurements And Adjustments

    9 Measurements and Adjustments 9.1. Adjustment Procedures The relation between Replaced part and Necessary Adjustment is shown in the following table. When concerned part is replaced, be sure to achieve the necessary adjustment(s). As for Adjustment condition/procedure, consult the “Adjustment Manual” which is available in Adjustment software. The Adjustment software is available at “TSN Website”, therefore, access to “TSN Website”...

  • Page 32: Maintenace

    10 Maintenace 10.1. Cleaning Lens, Viewfinder and LCD Panel Do not touch the surface of lens, Viewfinder and LCD Panel with your hand. When cleaning the lens, use air-Blower to blow off the dust. When cleaning the LCD Panel, dampen the lens cleaning paper with lens cleaner, and the gently wipe the their surface. Note: The Lens Cleaning KIT ;...
  • Page 33 DSC0602001CE S1. About Indication of The Schematic Diagram Service Manual S1.1. Important Safety Notice COMPONENTS IDENTIFIED WITH THE MARK HAVE THE SPECIAL CHARACTERISTICS Diagrams and Replacement FOR SAFETY. WHEN REPLACING ANY OF THESE COMPONENTS USE ONLY THE SAME TYPE. 1.Although reference number of the parts is indicated on the P.C.B. drawing and/or Parts List schematic diagrams, it is NOT mounted on the P.C.B.

  • Page 34: S2. Block Diagram

    S2. Block Diagram S2.1. Overall Block Diagram IC3102 IC3003 PRE PROCESS IC6002 SDRAM/256Mbit 6 MEGA PIX CDS,AGC,A/D, ZOOM IRIS SHUTTER FOCUS UNIT CARD IC3002 V-DRIVE IC7202 IC7002 SHUTTER AF/ZOOM,IRIS DRIVE, DRIVE OIS DRIVE&PRE PROCESS IC5001 MICROPHONE AUDIO ANALOG MICROPHONE AMP SPEAKER CONTROL SPEAKER IC2001...

  • Page 35: S2.2. System Control Block Diagram

    S2.2. System Control Block Diagram IC6001 (VENUS2/MICRO PROCESSOR) IC9101 (SYSTEM IC) TOP OPERATION UNIT IC6002 POWER SW ON(H) POWER SW ON(L) POWER SW ON HALF FP9002 (SDRAM/256Mbit) SHUTTER HALF SHUTTER 0 FULL SHUT HALF SHUTTER 0 SHUTTER 1 SHUTTER FULL SHUTTER 1 SDBA1 SHUT FULL...

  • Page 36: S2.3. Video/Audio Process Block Diagram

    S2.3. Video/Audio Process Block Diagram IC6002 (SDRAM/256Mbit) IC4001 (LCD COLOR DRIVER) 256Mbit(2Mx32bitx4pcs) CKV1 FP9003 BANK0 BANK2 STV1 FP9003 FP9003 BANK1 BANK3 COLUMN FP9003 RL4005 DECODER DECODER Y DECODERS XSTB1 FP9003 CLKIN PCG1 FP9003 CKH2 FP9003 I/O BUFFER & GATE ADDRESS BUFFER & REGISTER TIMING &...

  • Page 37: S2.4. Sensor Block Diagram

    S2.4. Sensor Block Diagram CL3002 CL3003 FLASH TRG CCDVD IC3102 IC3003 CCDHD (CCD IMAGE SENSOR) (CDS/AGC/AD/TG) FLASH VOUT Q3102 D0 39 FP9001 CCD IN 12bit (PGA) (12bit) Q3101 IC3004 (AND GATE) VSUB CLI 24 SERIAL (24.75MHz) 20 RG V10,12 VSG4 VSG8 SUBCK VSG1/V11...

  • Page 38: S2.5. Lens Drive Block Diagram

    S2.5. Lens Drive Block Diagram IC6001 (VENUS2) FP9001 QR7001 241 TM LEDCNT CHP CNT IC7102 (GYRO Y) FHP LED ZOOM ENC1 IC7103 TMENC1 LED FZ LEDCNT (GYRO AMP) TMENC2 LED 4 OUT VREF 1 GYRO Y TMENC2 ZOOM ENC2 CAM ENC FOCUS ENC TMENC2 TMENC1...

  • Page 39: S2.6. Power Block Diagram

    S2.6. Power Block Diagram CL2009 JK2004 F1001 UNREG CL2010 5.3V JACK CL1009 CL1008 LCD 4.7V IC1005 To IC6001-239 (SWITCHING REGULATOR) Q1001 (LCD POFF L) VOUT IC1001 IC1002 3.3V BAT+ CL1010 (7CH SW REGULATOR IC) (REGULATOR) QR1001 CL1004 VOUT BATTERY A3.1V PDRV VBAT Q1008...

  • Page 40: S3. Schematic Diagram

    S3. Schematic Diagram S3.1. Interconnection Diagram EVF UNIT TOP OPERATION UNIT FLASH UNIT BATTERY SPEAKER V COM PVDD P9002 CKH1 CKH2 D GND P9005 P9008 P9001 LCD G LCD R LCD B FP9003 FP9004 P9004 VCSH FP9002 FP9001 OEVE P9003 MICROPHONE MIC GND PVREF...

  • Page 41: S3.2. Af Led/Mic Schematic Diagram

    S3.2. AF LED/Mic Schematic Diagram DMC-FZ7 AF LED/Mic Schematic Diagram...

  • Page 42: S3.3. Lens Flex Schematic Diagram

    S3.3. Lens Flex Schematic Diagram POSITIVE VOLTAGE LINE COIL STEPPING FOCUS MOTOR UNIT MOTOR COIL PHOTO CAM ENCODER SENSOR CABS CENC V C_LEDCONT DC SOLENOID (SHUTTER) SHUTTER UNIT STEPPING COIL MOTOR (IRIS) COIL FENC V PHOTO FOCUS ENCODER FABS SENSOR F_LEDCONT TO MAIN (LENS DRIVE) Y VO+...

  • Page 43: S3.4. Ccd Flex Schematic Diagram

    S3.4. CCD Flex Schematic Diagram DMC-FZ7 CCD Flex Schematic Diagram S-11...

  • Page 44: S4. Print Circuit Board

    S4. Print Circuit Board S4.1. AF LED/Mic P.C.B. DMC-FZ7 AF LED/Mic P.C.B. S-12...

  • Page 45: S4.2. Lens Flex P.c.b

    S4.2. Lens Flex P.C.B. FOCUS MOTOR UNIT CAM ENCODER FOCUS ENCODER ZOOM MOTOR C2 C3 C4 C5 C6 SUTTER UNIT C1 E4 E3 E2 E1 E5 E6 E7 E8 E9 OIS UNIT E11E10 ZOOM ZOOM ENCODER 2 ENCODER 1 Pin 40 Pin 1 DMC-FZ7 LENS FLEX P.C.B.

  • Page 46: S4.3. Ccd Flex P.c.b

    S4.3. CCD Flex P.C.B. (Component Side) (Foil Side) DMC-FZ7 CCD Flex P.C.B. S-14...

  • Page 47: S5. Replacement Parts List

    1. Parts marked with [MBI] in the remarks column are supplied from “Matsushita Battery Industrial Co., Ltd.” 2. Parts marked with [PAVC-CSG] in the remarks column are supplied from PAVC COMPANY CS Group (PAVC-CSG). Others are supplied from “Panasonic Shikoku Electronics Co., Ltd." (PSEC-SAIJO). S-15...
  • Page 48 DMC-FZ7PP-S/K,PL-S/K,EG-S/K,EGM-S/K,EF-S/K,EB-S/K,EE-S/K,GC-S/K,GT-S/K,GK-S/K,GN-S/K,GD-K,SG-S Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks ------ P.C.B. LIST ------ VEP56031A MAIN P.C.B. 1 E.S.D.(RTL) VEP59023A AF LED/MIC P.C.B. 1 E.S.D.(RTL) VEK0J72 CCD UNIT 1 E.S.D.[PAVC-CSG] --- ELEC. COMPONENTS --- S-16...
  • Page 49 DMC-FZ7PP-S/K,PL-S/K,EG-S/K,EGM-S/K,EF-S/K,EB-S/K,EE-S/K,GC-S/K,GT-S/K,GK-S/K,GN-S/K,GD-K,SG-S Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks VEP59023A AF LED/MIC P.C.B. E.S.D.(RTL) D9301 B3ADB0000057 DIODE 1 E.S.D. M9301 L0CZAB000004 MICROPHONE UNIT P9301 K1KA05BA0273 CONNECTOR VEK0J72 CCD UNIT E.S.D.[PAVC-CSG] C3101 ECJ0EB1A104K C.CAPACITOR CH 10V 0.1U 1 [PAVC-CSG] C3102 ECJ1VB1C105K C.CAPACITOR CH 16V...
  • Page 50 DMC-FZ7PP-S/K,PL-S/K,EG-S/K,EGM-S/K,EF-S/K,EB-S/K,EE-S/K,GC-S/K,GT-S/K,GK-S/K,GN-S/K,GD-K,SG-S M1 / M2 Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks VDW1272 LENS RING FRONT 1 (BLACK) K0RB01000007 TOP OPERATION UNIT 1 (BLACK) VDW1271 LENS RING FRONT 1 (SILVER) K0RB01000006 TOP OPERATION UNIT 1 (SILVER) VGU9907 FLASH LOCK LEVER KNOB...
  • Page 51 DMC-FZ7PP-S/K,PL-S/K,EG-S/K,EGM-S/K,EF-S/K,EB-S/K,EE-S/K,GC-S/K,GT-S/K,GK-S/K,GN-S/K,GD-K,SG-S Ref.No. Part No. Part Name & Description Remarks Ref.No. Part No. Part Name & Description Remarks VQT0W44 O/I PC CONN. 1 [PAVC-CSG]  100 ------------ BATTERY (SPANISH/PORTUGUESE/ EGM-K/S  101 DE-993B BATTERY CHARGER 1 PP-K/S,PL-K/S SWEDISH/DANISH)  101 DE-994A BATTERY CHARGER 1 EG-K/S,EGM-K/S,EF-K/S, VQT0W45...

  • Page 52: S6. Exploded View

    S6. Exploded View S6.1. Frame and Casing Section (1) S-20...

  • Page 53: S6.2. Frame And Casing Section (2

    S6.2. Frame and Casing Section (2) S-21...

  • Page 54: S6.3. Packing Parts And Accessories Section

    S6.3. Packing Parts and Accessories Section (DMC-FZ7EE/EF/EG/EGM/GC/SG) (DMC-FZ7EB/GC/SG) (DMC-FZ7GN) (DMC-FZ7GK/GT) (DMC-FZ7GD) S-22...

This manual is also suitable for:

Lumix dmc-fz7plLumix dmc-fz7egLumix dmc-fz7egmLumix dmc-fz7gcLumix dmc-fz7ebLumix dmc-fz7ee ... Show all

Table of Contents