Panasonic Lumix DMC-FZ7 Operating Instructions Manual page 115

• Is the camera recognized by the PC
correctly?
• Set [USB MODE] to [PC]. (P23, 98)
5: The card is not recognized by the PC.
• Disconnect the USB connection cable.
Connect it again while the card is
inserted in the camera.
6: The picture cannot be printed when
the camera is connected to a printer.
• Does the printer support PictBridge?
– You cannot print pictures with printers
which do not support PictBridge.
(P100)
• Set [USB MODE] to [PictBridge (PTP)].
(P23, 100)
7: The ends of the pictures are cut at
printing.
• When using a printer with a trimming or
borderless printing function, cancel this
function before printing. (For details,
refer to the operating instructions for the
printer.)
• When you order photo studios to print
pictures, ask the photo studio if the
pictures can be printed with both ends.
8: The picture is not displayed fully on
the TV.
• Set the aspect of the TV on the camera.
(P24)
∫ Others
1: An unreadable language was selected
by mistake.
• Press [MENU/SET], select the [SETUP]
menu icon [ ] and then select the [
icon to set the desired language. (P24)
2: The camera will make sounds caused
by internal mechanical movement
when it is shaken.
• The sound arises when the lens moves.
This is not a malfunction.
3: The setting for the auto review
function is disabled.
• Are you taking pictures using auto
bracket (P48)? Is the camera in burst
mode (P50) or motion picture mode
[ ] (P68)? Is [AUDIO REC.] set to
[ON] (P79)?
– In these cases, you cannot set the
auto review function in the [SETUP]
menu.
4: A red lamp sometimes turns on when
the shutter button is pressed halfway.
• In dark places, the AF assist lamp (P82)
lights red to make it easier to focus on a
subject.
5: The AF assist lamp does not turn on.
• Is [AF ASSIST LAMP] on the [REC]
mode menu set to [ON]? (P82)
• Are you taking pictures in dark places?
– The AF assist lamp does not turn on
in bright places.
• The AF assist lamp does not turn on
when [SCENERY] (P60),
[NIGHT SCENERY] (P61),
[FIREWORKS] (P63) or [PANNING]
(P61) in scene mode is selected.
6: The camera becomes warm.
• The surface of the camera may become
warm during use. This does not affect
the performance or quality of the
camera.
7: The lens clicks.
• When the brightness changes due to
zoom or camera movement etc., the
lens may click and the picture on the
screen may drastically change.
]
However, the picture is not affected.
The sound is caused by the automatic
adjustment of the aperture.
This is not a malfunction.
Others
115
VQT0V63