Panasonic Lumix DMC-FZ7 Operating Instructions Manual page 22

Panasonic lumix dmc-fz7: user guide
Hide thumbs Also See for Lumix DMC-FZ7:
Table of Contents

Advertisement

Preparation
[PLAY ON LCD]
MENU
Press [
] to display the [SETUP] menu
SET
and select the item to set. (P20)
[ON]: If you were using the viewfinder to
record, the display automatically
switches to the LCD monitor when
reviewing or playing back pictures.
(P39)
[OFF]: Does not automatically switch.
[POWER SAVE]
MENU
Press [
] to display the [SETUP] menu
SET
and select the item to set. (P20)
[1MIN.]/[2MIN.]/[5MIN.]/[10MIN.]:
Power save mode is activated (the
camera is automatically turned off to
save the battery life) if the camera
has not been used for the time
selected on the setting.
[OFF]: Power save mode is not activated.
• Press the shutter button halfway or turn
the camera off and on to cancel power
save mode.
• In simple mode [
fixed to [2MIN.].
• When using the AC adaptor (DMW-AC7;
optional), connecting to a PC or a printer,
recording or playing back motion pictures
and during a slide show, power save
mode is not activated. (However, the
setting for power save mode is fixed to
[10MIN.] while pausing a slide show or
playing back a manual slide show.)
[AUTO REVIEW]
MENU
Press [
] to display the [SETUP] menu
SET
and select the item to set. (P20)
[1SEC.]: The recorded picture
automatically appears on the
screen for about 1 second.
[3SEC.]: The recorded picture
automatically appears on the
screen for about 3 seconds.
[ZOOM]: The recorded picture
automatically appears on the
screen for about 1 second. It is
22
VQT0V63
], power save mode is
then enlarged 4 times and
appears for about 1 second. This
mode is useful for confirming
focus. Pictures recorded using
auto bracket or burst mode and
pictures with audio are not
enlarged even if [ZOOM] is
selected.
[OFF]:
The recorded picture does not
automatically appear.
• The auto review function is not activated
in motion picture mode [
• When pictures are recorded in auto bracket
(P48) or burst mode (P50), the auto review
function is activated regardless of the
setting on the auto review function. (The
picture is not enlarged.)
• The auto review function is activated while
pictures with audio (P79) are being
recorded regardless of its setting. (The
picture is not enlarged.)
• When the quality is set to [TIFF], the auto
review function works until the end of
recording onto the card. (The picture is
not enlarged.)
• The auto review setting is disabled when
using auto bracket or burst mode, in motion
picture mode [
], when [AUDIO REC.] is
set to [ON] or when the quality is set to
[TIFF].
[MF ASSIST]
(Recording mode only)
MENU
Press [
] to display the [SETUP] menu
SET
and select the item to set. (P20)
In manual focus, the assistance screen
appears on the center of the screen to
facilitate focusing on the subject. (P56)
[MF1]: The center of the screen is
enlarged. You can adjust the focus
while determining the composition
of the whole of the screen.
[MF2]: The whole of the screen is enlarged.
This is convenient for adjusting the
focus in Wide angle shots.
[OFF]: The screen is not enlarged.
].

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Dmcfz7 - digital still cameraDmcfz7k - lumix digital cameraDmc-fz7Dmcfz7sDmc-fz7k

Table of Contents