Infiniton WM-Y94AWM Manual page 44

How to use
English
Additional functions
Spin
When necessary, the spin speed can be adjusted by pressing this button in the following steps: 0-400-
600-800-1000-1200-1400-1400.
following steps: 0-400-600-800-1000-1200-1400
Programmed start
1. Select a program
Press the Programmed Start button to select the time from 0-24h.
3.Press [Start/Pause] to start the operation.
Cancel the function:
Press the [Programmed Start] button before starting the program. If the program has already started,
you must turn off the unit to restart.
Dirt level
The wash time will increase or decrease after selecting it.
If there is any interruption in the power supply while the machine is running, a special memory stores the
selected program and when the power is restarted, the program will continue.
Prewash
Additional wash function before the main wash cycle starts to increase the washing performance.
washing performance.
Note: Detergent must be added to compartment I.
Extra Rinse
The laundry will undergo an extra rinse after selecting this function.
Temperature
When necessary, the wash temperature can be adjusted by pressing the temperature button in the fo-
llowing steps:
Cold - 20°C - 30°C - 30°C - 40°C - 60°C - 90°C.
Note:
Usage counter
1. Switch off the unit for 10s and switch it on again.
2. Turn on the unit and, for 10 seconds, press "Programmed start" and "Antimicrobic Technology" on the
control panel simultaneously and continuously for about 5 seconds until the device display shows digits:
the value may indicate the time of use of the equipment.
3. Repeat step 1 again and you can resume normal operation.
Faster Wash
This function can reduce the washing time.
My Cycle
To memorize the most frequently used program. After selecting the program and setting the options,
press [Temp] 3sec. before starting to wash.
The default program set is Cotton.
44
infiniton.es