Infiniton WM-Y94AWM Manual page 40

How to use
Centrifugation
Allows you to adjust the spin speed. With the spin speed preset or selected, the selected spin speed will
be illuminated on the display.
Steam Care
Press to add this function, press twice to cancel and follow the cycle in sequence. Programs with the
steam icon can make use of the steam function. The Antiallergen and Baby Clothes programs come with
this function by default and cannot be deactivated. When this function is selected, the corresponding
steam icon lights up.
Options
In standby mode, press the "Options" button to select an additional function for the current program. Se-
lect only one function per press, then the corresponding icon flashes. After start-up, the program cannot
be changed.
Prewash
Select this function to perform a prewash to improve the washing effects and better remove stains. This
function is suitable for heavily soiled laundry. When selecting the prewash function, add detergent in the
prewash compartment of the detergent dispenser.
Extra rinse
After setting the extra rinse function, the program runs the rinse process one more time before running
the softening, and the total program run time increases accordingly.
Intensive
This function can be used to increase the intensive washing time and improve the washing intensity..
Programmed start
Use this function to program the wash at a specific time. Press this key to program the time. This key is
only valid when the washer is in standby mode. Once the function is selected, each time this key is pres-
sed, the time will be increased by 1 hour. The maximum selectable time is 24 hours. The programmed
Start time is the end time, i.e. it includes the wash time, so this time must be longer than the wash time.
Depending on your settings, the cycle start time will be determined by the machine's internal logic. Press
to select a preset unit of hours.
When this function is being selected (set), the Clock icon will always be on;
When the program is running, the Clock icon flashes.
If this function has been selected before starting a program, it can be cancelled by pressing any other
function key. Once the program has been started, it is necessary to press and hold the Power button to
switch the machine off and on again to cancel this function.
40
English
infiniton.es