Infiniton WM-Y94AWM Manual page 39

How to use
Control panel
1 PROGRAM SELECTOR - Turn the dial to select the desired wash program.
2 ON/OFF - Turn the program selector to turn the washer on/off.
3
START/PAUSE - Press this button to start or pause the selected program.
4 TEMPERATURE - Press this button to change the preset temperature in the selected program.
5
SPIN - Press this button to change the preset spin speed in the selected program.
6
STEAM CARE - Press to select this function.
7
OPTIONS - Press this button to select additional functions.
8
PROGRAMMED START - With this button you can program the start/end of the selected program
at a specific time.
4+5 CHILD LOCK - Press these two buttons at the same time to activate/deactivate the child lock.
5+6
MUTE - Press these two buttons to activate or deactivate the acoustic signals.
On / Off
To switch the washing machine on and off. Turn the washer on by turning the program selector. During
program operation, if it is necessary to turn it off, turn the knob to the "ON/OFF" position to turn it off.
Start / Pause
To start a program or pause a program in progress. If the machine door is not closed or the door lock is
not activated, the washer will not start and an alarm will be shown on the display. After starting a pro-
gram, or when the pause state is selected, the set functions and parameters cannot be changed. Turn
the machine off and turn the knob again to reset the programs and parameters.
Temperature
Changing the temperature of the selected program. Each program has a preset temperature which can
be changed by pressing the TEMP. position (--indicates cold wash). The temperature is shown on the
display unit above the button.
39
English
infiniton.es