Safety Information - Siemens SIMATIC RTLS4030T EX2 Operating Instructions Manual

Safety information

Observe all safety information
Observe the following safety information for operation of the transponder in hazardous areas.
Comply with general regulations
• Compliance with general legal regulations or guidelines on occupational safety, accident
• In view of the risk of dangerous electrostatic charging, wear suitable clothing and footwear.
• Avoid heat exposures outside the permissible ambient temperature range, see section
• IEC 60079-17 requires the owners of electrical installations in hazardous areas to have them
• Compliance with the relevant installation and operation regulations for electrical
Risk of death or injury due to unintended use
Use the transponder only for its intended use under permissible ambient conditions.
Permissible ambient conditions
• Approved for Zone 2
• Ambient temperature range
• Operating temperature range
• Storage and transport temperature
SIMATIC RTLS4030T EX2
Operating Instructions, 06/2024, C79000-G8976-C711-03
WARNING
WARNING
prevention regulations and environmental protection laws, such as the Industrial Safety
Ordinance (BetrSichV) or applicable national regulations, is required.
"Technical specifications (Page 21)".
inspected for proper condition by a skilled electrician.
installations is required (e.g. Directives 99/92/EC and 2014/34/EU, BetrSichV or the
applicable national regulations, IEC 60079-14 and DIN VDE 0100).
WARNING
WARNING
-10 °C to +50 °C
-10 °C to +50 °C
-10 °C to +50 °C
2
9