Siemens SIMATIC RTLS4030T EX2 Operating Instructions Manual page 11

Risk of serious injury due to electrostatic charging
• Use only a moist cloth to clean the transponder.
• When selecting the right cleaning agent, pay attention to its suitability, since damage to
Damage due to incorrect transport or storage
• Transport and storage of the transponder is only permitted in its original packaging.
• The transponder must be stored in a dry place.
NOTICE
LABS (paint-wetting impairment substances)
When opening and working inside the transponder in LABS-restrictive areas, it is required for
hands, work tools and the cover to be cleaned to prevent contamination to and from the
interior of the transponder. Even if LABS have deliberately not been processed, minimal
residues cannot be ruled out.
NOTICE
Guaranteeing supply voltage during the firmware update
If the supply voltage is interrupted during the firmware update process, this can lead to failure
of the device. Therefore, consider the following notes on the supply voltage during a firmware
update:
• A stable supply voltage must be guaranteed before and during a firmware update.
• Battery-operated devices must be in the corresponding charging station during the
• With battery-operated devices, it must be ensured that the battery capacity is greater than
SIMATIC RTLS4030T EX2
Operating Instructions, 06/2024, C79000-G8976-C711-03
WARNING
seals and connections may occur otherwise. Flammable products are generally not
permitted.
WARNING
firmware update process.
50% to be able to successfully complete the update process. You are advised to use a new
and full battery in the device for the update process.
Safety information
11