Video Out; Frame Assist - Olympus SP-560 Instruction Manual

VIDEO OUT ........................................................................

NTSC
The factory default settings differ according to the region where the camera is sold.
To play back camera images on a TV, set the video output according to your TV's video signal type.
• TV video signal types by country/region. Check the video signal type before connecting the
camera to the TV.
NTSC
PAL
Playing back pictures on a TV
Turn off the camera and the TV before connecting.
Settings on the TV
Turn the TV on, and set it to video input mode.
• For details of switching to video input, refer to
your TV's instruction manual.
• Images and the information displayed on the
screen may become cropped depending on the
f frame
TV's settings.

FRAME ASSIST ....................

OFF /
PressDISP./E in shooting mode to determine the type of frame assist to be displayed.
Selecting [OFF] or when pressing DISP./E will not display the frame assist.
u ............................................................................................
OFF /
Press DISP./E in shooting mode to determine whether to display the histogram.
• When set to [DIRECT], the black (blue) and white (red) areas are displayed directly on the
picture.
46
EN
/ PAL
: North America, Taiwan, Korea, Japan
: European countries, China
Connector cover
w / x
ON / DIRECT
Connect to the TV's video input (yellow) and
audio input (white) terminals.
AV cable (provided)
Settings on the camera
Press o in playback mode to turn the
camera on.
• The last picture taken is displayed on the
TV. Use the arrow pad to select the picture
you want to display.
Displaying the frame assist/Determining the type of frame assist
Playing back pictures on a TV
Multi-connector
Displaying the histogram