Selecting A Language; Setting The Date And Time - Olympus CAMEDIA C-5060 Wide Zoom Basic Manual

basic_e_x191_6.fm Page 17 Thursday, August 28, 2003 12:44 PM
Power off
1
To turn the power off, turn the power switch
so that OFF is aligned with the ( mark.
• The monitor turns off, the lens retracts and the power
turns off.
2
Turn the monitor towards the camera and
close it.
• To protect the monitor, you are recommended to keep
it closed when the camera is not in use.

SELECTING A LANGUAGE

1
Set the mode dial to P and turn the camera on.
• You can select the language in all modes.
2
Press e.
• The top menu is displayed.
3
Press d on the arrow pad to select MODE MENU.
4
Press ac to select the SETUP tab, then press d.
5
Press ac to select W, then press d.
6
Press ac to select a language, then press e.
7
Press e again to exit the menu.
8
To turn the camera off, set the power switch to OFF.

SETTING THE DATE AND TIME

1
Set the mode dial to P and turn the camera on.
• You can set the date and time in all modes.
2
Press e.
• The top menu is displayed.
3
Press d on the arrow pad to select MODE MENU.
4
Press ac to select the SETUP tab, then press d
5
Press ac to select X, then press d.
• The green frame moves to the selected item.
• Press c repeatedly to change the page until X is displayed.
En
En 17