Protecting Pictures; Erasing Pictures - Olympus CAMEDIA C-5060 Wide Zoom Basic Manual

basic_e_x191_6.fm Page 41 Thursday, August 28, 2003 12:44 PM
• Press e again after playback ends to display the menu.
PLAYBACK
FRAME BY FRAME : Plays back the movie manually one frame at a
EXIT
Press ac to select the desired operation, then press e.
When FRAME BY FRAME is selected
a : Displays the first frame of the movie.
c : Displays the last frame of the movie.
d
: Displays the next frame. The movie can be played continuously by
holding the button down.
b
: Displays the previous frame. The movie can be played continuously in
reverse by holding the button down.
e : Displays the MOVIE PLAYBACK menu.

PROTECTING PICTURES

You are recommended to protect important pictures to avoid accidentally
erasing them.
1
Set the mode dial to q and turn the camera on.
• The monitor turns on.
2
Use the arrow pad or control dial to display the picture
you want to protect.
3
Press 0.
• To cancel protection, press 0 again.
• Protected pictures cannot be erased by the single-frame/all-frame
erase function, but they are all erased by formatting.
Note

ERASING PICTURES

This function enables you to erase recorded pictures. This can be done either
one frame at a time or to all the pictures on the card at once.
• Once erased, pictures cannot be restored. Check each picture
before erasing to avoid accidentally erasing pictures you want to
Note
keep.
: Plays back the entire movie again.
time.
: Leaves the movie playback mode.
En
En 41