Playback On A Tv - Olympus CAMEDIA C-5060 Wide Zoom Basic Manual

basic_e_x191_6.fm Page 43 Thursday, August 28, 2003 12:44 PM
2
If the mode dial is set to P A S M r n m l k j
i, press a to select YES.
If the mode dial is set to q, press c to select I
FORMAT, then press e. The I FORMAT screen is
displayed. Press a to select YES.
3
Press e.
• The BUSY bar is displayed and the card is formatted.

PLAYBACK ON A TV

Use the AV cable provided with the camera to play back recorded images on
your TV. Both still pictures and movies can be played back.
1
Make sure that the TV and camera are turned off.
Connect the A/V OUT jack on the camera to the video
input terminal on the TV using the AV cable.
Connect to the TV's video input (yellow)
and audio input (white) terminals.
2
Turn the TV on and set it to the video input mode.
• For details of switching to video input, refer to your TV's instruction
manual.
3
Set the mode dial to q and turn the camera on.
• The last picture taken is displayed on the TV. Use the arrow pad to
select the picture you want to display.
• The close-up playback, index display and slideshow and other
playback functions can also be used on a TV screen.
• You are recommended to use the optional AC adapter when using
the camera with a TV.
Note
• Make sure that the camera's video output signal type is the same as
the TV's video signal type.
AV cable
A/V OUT jack (MONO)
En
En 43