Loading the batteries
This camera uses two CR-V3 lithium battery packs or four AA (R6) NiMH
batteries, NiCd batteries, alkaline batteries or lithium batteries.
Important
• CR-V3 lithium batteries cannot be recharged.
• Do not peel off the label from a CR-V3 lithium battery pack.
1
Make sure the power switch is set
to OFF.
2
Slide the battery compartment
lock from
3
Place your finger on the
mark and slide the battery
compartment cover in the
direction of
direction of
• Use the ball of your finger to slide the
cover. Do not use your fingernail as this
could result in injury.
to
.
, then lift in the
.
Power switch
1
21