Multi-metering
Mode dial
1
Turn the jog dial while holding
down
and select
•
is displayed on the control panel.
2
Position the AF target mark on the
area you want to meter and press
the AEL (AE Lock) button. The
brightness is metered at up to 8
different points.
• The monitor turns on and the multi-
metering bar appears.
• Brightness meter readings are ignored after the 9th reading.
• To perform metering again, press the AEL button for more than 1
second to display
metering values.
.
. Press the AEL button again to cancel the
Metering
Metering button
Jog dial
AEL button
103
6