Histogram display
• The histogram is not displayed in the following situations even if
histogram display is set to ON.
Note
In movie mode, during panorama shooting, during 2 in 1
shooting, during Rec View, during multi-metering
• You can turn the histogram display on and off during exposure
compensation.
Changing the position of the histogram target mark
While the histogram is displayed in shooting mode, hold down
the arrow pad to move the histogram target mark. The area inside the target
is displayed in green on the histogram.
To restore the histogram target mark to its original position, press
7
146
"Exposure compensation" (P.131)
SEt
+
and use
.
EXIt