Video Output Selection - Olympus CAMEDIA C-5050 Zoom Reference Manual

Video output selection

You can select NTSC or PAL according to your TV's video signal type. Select
the video signal type before shooting. If you use the wrong video signal type,
you will not be able to play back the recorded pictures properly on your TV.
Mode dial
1
In the top menu, select MODE
MENU → → → → SETUP → → → → VIDEO OUT → → → →
NTSC or PAL, and press
"How to use the menus" (P.70)
• Press
• The factory default setting varies
depending on the area where you
purchased this camera.
TIPS
TV video signal types & main regions
Check the video signal type before using the camera.
NTSC : Japan, Taiwan, Korea, North America
PAL
9
192
again to exit the menu.
: European countries, China
.
Arrow pad
OK button