Page 2
Foreword Thank you for choosing BYD. To better use and maintain the vehicle, please read this manual carefully and keep it for future reference. Special instructions: BYD Auto Co., Ltd. recommends that you choose genuine spare parts and use, maintain, and repair the vehicle in accordance with this manual. The use of non-genuine spare parts to replace or modify the vehicle will affect the performance of the entire vehicle, especially its safety and durability.
Page 3
(if any) related to this product, or consult the dealer who sold the product to you. Sustainability As a pure electric passenger vehicle, BYD ATTO 3 is an environmentally friendly product. Please visit https://reach.bydeurope.com for environmental protection information about the vehicle.
Illustration Index Smart Access and Start System....57 Child Protection Lock......59 Exterior..........7 Seats..........59 Dashboard......... 8 Seat Precautions........59 Center Console........9 Adjusting Front Seats......60 Doors..........10 Folding Rear Seats........61 Head Supports.........61 Safety Steering Wheel......... 62 Steering Wheel.........62 Seat Belts.........12 Switches.......... 65 Seat Belt Overview........
Page 5
Saving Energy and Extending Infotainment Touchscreen....150 Vehicle Service Life........107 Navigation Bar........151 Carrying Luggage........108 Gestures and Responses....... 151 Wading into Water......... 110 BYD Assistant......... 151 Fire Prevention........110 Bluetooth Call........152 Snow Chains.......... 112 File Management........152 Starting and Driving......112 A/C System........152 Starting the Vehicle.......
Page 6
USB Ports..........163 If the Vehicle Needs Towing....194 12V Auxiliary Power.......163 If a Tire Goes Flat........195 Wireless Phone Charger......164 Cargo Cover*..........165 Specifications Vehicle Data........200 Maintenance Vehicle Data........... 200 Maintenance Information....168 Vehicle Identification......204 Maintenance Cycle and Items....168 Information........
Doors P179 Opening with Interior Door Handle Hood Handle Locking/Unlocking the Trunk Power Window Switches Window Lock Button Central Locking P147 Side Mirror Switches...
Using Seat Belts ② Move the adjuster up or down to the intended position. Release the button to lock the adjuster. 1. Adjust the seat position and seatback angle (see 2. Adjust the position of the three-point seat belt. Keeping a proper sitting posture, pull ●...
Page 15
After an accident, have the seat ● Seat belt reminder indicator belts checked at a BYD authorized ● dealer or service provider. If the This indicator flashes if any seat belt is preloading function is activated, not fastened.
In the event of abnormality automatic braking will be activated ● when the driver airbag or the front or function failure, contact a BYD authorized dealer or passenger airbag deploys. service provider. Do not use Speed reduction, along with the corresponding seat until the ●...
When there is a frontal crash, the seat ● belt secures the occupant's lower body Non-BYD genuine seat covers may ● and torso in place. The airbag cushions worsen the airbag performance and protects the occupant's head and or result in injury.
travel and the triggering conditions are met, the far side airbag deploys to protect the heads and shoulders of the driver and the front passenger. If the impact occurs on the front ● passenger side, the far side airbag deploys even if there is no passenger in the seat.
ECU, the airbag system will not be triggered even if the vehicle may have been seriously deformed in the accident. The ECU of the BYD airbag system ● has been set up with considerations of common misuse and road conditions.
Page 20
One side of the vehicle is hit by another The tail of the vehicle is hit by another vehicle. vehicle. The vehicle rolls over. Cases When Airbags May Not Be Deployed The vehicle hits a concrete column, tree, or other slim objects. The vehicle hits a wall or a vehicle at a side other than the front side.
Page 21
Parts other than the passenger WARNING compartment receive side impact. Airbags are designed for ● specific models. Any changes to suspension, tire size, bumpers, chassis and factory-equipped devices may adversely affect the airbag system. Users must not use any parts of the airbag system on other car models;...
Page 22
Failure to do so could by a BYD authorized dealer or result in serious injury or even service provider. death. Airbags can only provide one-time ●...
Page 23
It is recommended that you contact a BYD authorized dealer or service provider immediately if any of the The airbag cover has been scratched, ●...
Please select a suitable child restraint restraint system. ● system for your child's weight and BYD Auto recommends that stature. ● children should use an For larger children that cannot fit in appropriate child restraint system, ●...
Page 25
CAUTION are seated on a rear outboard seat. Always follow the detailed instructions ● provided by the manufacturer of the child restraint system. Secure the top tether when installing ● the CRS. Installing the child restraint system Never leave a child restraint system ●...
Page 26
After the seat head support is ● removed, keep it in the trunk. BYD recommends installing the ● child restraint system using the ISOFIX anchorage points of the vehicle. The front passenger seat is equipped ●...
Page 27
Only use child seats that are ● recommended by BYD, are universally CAUTION approved, or are semi-universal and where the vehicle model is included Extension straps may be required on the child restraint manufacturer's ●...
Page 28
Front Passenger Seat* Front Front Group Child Weight Rear Seats passenger passenger front airbag front airbag Front-facing 9 to 18 kg Group 2 15 to 25 kg Group 3 22 to 36 kg Note: Table definitions: The identification marking of the ●...
Front Passenger Seat* Child Seat Size class / Rear Rear Front Front Orientatio n Group ISOFIX Outboard Middle passenger passenger class Seat Seat front front airbag ON airbag OFF Group 3: Front- IL-SU IL-SU facing 22 to 36 kg Rear-facing –/R2 i-Size child restraint...
Use of an NFC to unlock the vehicle. processed when you use a BYD vehicle. ● Use of the microswitch to unlock the For a more detailed overview on data ●...
Page 31
● ● and read by special equipment. stored in the equipment in the BYD discloses your personal data to vehicle but can be read out via third parties only if this is legally the legally required OBD ("On Board permissible or you have consented Diagnostics") interface, for example,...
Page 32
Other vehicle's infotainment system network Infotainment system devices. Depending on vehicle configuration, BYD is not liable for any such services ● ● data can be added to the infotainment provided by any other party. system by the users themselves, such...
Page 33
It is the owner's responsibility to be ● aware of their country's corresponding If required by law, BYD may also be ● laws before turning on their OFC or obliged to disclose data upon request IFC cameras (for instance, in some...
Page 34
information to you would disclose personal data about another person, or if we are legally prevented from disclosing that information. In some cases, this may mean that ● we can retain the data even if you withdraw your consent. For more information on data ●...
Instrument Cluster Instrument Cluster View LCD Instrument Cluster Time Total mileage Power meter Remaining driving range Speedometer Gear status State of charge (SOC) Drive mode information Outside temperature Energy regeneration information...
Page 40
If any of the following cases occurs, it ● means there is a fault in components monitored by the warning light system. In that case, contact a BYD authorized Smart key warning light dealer or service provider for vehicle inspection as soon as possible.
Page 41
In that case, contact a BYD authorized corresponding tire is leaking rapidly. dealer or service provider for vehicle inspection as soon as possible.
Page 42
ESC system. monitored by the warning light system. In that case, contact a BYD authorized dealer or service provider for vehicle inspection as soon as possible. Driving power limit warning light When the ignition is switched on, this ●...
Page 43
If any of the following cases occurs, it become difficult to turn even if the ● means there is a fault in components warning light does not turn on. This is monitored by the warning light system. not a fault. In that case, contact a BYD authorized...
Page 44
● the warning light is on. Contact a warning light system. In such case, BYD authorized dealer or service it is recommended to contact a BYD provider to check the problem as authorized dealer or service provider soon as possible.
Page 45
The BSD system for lane change is faulty. In Please check the BSD system* this case, park the vehicle, and contact a BYD authorized dealer or service provider. The BSD function is limited. In this case, park...
Page 46
The intelligent cruise control (ICC) or lane keeping system (LKS) is faulty. In this Please check the ICC or LKS* case, park the vehicle, and contact a BYD authorized dealer or service provider. The ICC or LKS function is limited. In this...
● smart key is hazardous and both for the same car. In this case, new and used batteries are to be contact a BYD authorized dealer kept away from children at all or service provider immediately. times. If the electronic smart key cannot ●...
Page 50
It is recommended to contact a devices should also consult the BYD authorized dealer or service manufacturer on the use of provider for inspection as soon such devices under the influence as possible.
In order to ensure vehicle safety, handle it with care. If it is lost, going to BYD authorized dealer or service provider for blocking of the lost card and re- configuration is recommended.
Page 52
Locking/Unlocking with Smart Key CAUTION The wireless remote control is used After removing the mechanical ● ● to unlock or lock all doors at a close key, pull the driver's door handle distance, and complete additional to open the door. functions.
Page 53
the interior lights will stay on for 15 When the vehicle is in car search ● seconds and then go out. mode, press the lock button again. The vehicle enters the next car search If the anti-theft alarm system is armed, mode.
Page 54
horn will only sound once, and the turn disable this function, go to → signals will not flash. Vehicle Settings → Locks. Locking/Unlocking with NFC Key Card Hold the NFC card close to the NFC ● sign on the side mirror on the driver's side.
Page 55
Locking/Unlocking the Trunk Opening/Closing trunk with smart key When the vehicle is equipped with the electric tailgate system, double-press the trunk release button on the smart key to open the trunk. The turn signals then flash twice. Press this button again to stop opening.
Page 56
Press the trunk close button a second ● time to stop the lid at the current position. If the button is then pressed again, this lid will move in the opposite direction. REMINDER When the vehicle is powered off, ● the trunk can be unlocked from the inside in case of emergency.
Page 57
WARNING WARNING In order to prevent serious The anti-pinch function may fail ● ● injury, make sure to observe the depending on the object shape. following precautions: Be especially careful about hand and fingers. Never try to deliberately activate ● the anti-pinch function.
Smart Access and Start Emergency Vehicle Locking with Mechanical Key System When the central locking system or the smart key fails, use the mechanical key Use the smart key to unlock or lock the for emergency locking or unlocking. vehicle doors and start the vehicle. Locking Access 1.
Page 59
If the smart access and start system ● mobile phone. cannot work properly due to system failures, bring all smart keys to a BYD The smart key is in contact with or ● authorized dealer or service provider covered by a metal object.
Seats Child Protection Lock Child protection locks are designed to Seat Precautions prevent children in rear seats from accidentally opening rear doors. Such locks are provided on the sides of the left When the vehicle is moving, all and right rear doors. passengers in the vehicle must fasten their seat belts, and rest their backs ①...
REMINDER After manually adjusting the seat, ● always check that it is securely locked into place by attempting to push it forward and backward. After adjusting the seatback, lean ● back to confirm the seatback has been locked. Do not place any items under ②...
This function is always disabled when ● the vehicle is just powered on. Folding Rear Seats Flipping and lowering the seatback ● Pull the cord to straighten the ● seatback. Push the seatback forward/backward ● 3. Removing a head support to fold it.
Steering Wheel REMINDER Do not tie anything to the head ● Steering Wheel support posts. Steering Wheel Switches Panoramic view* Call Screen mode Speech recognition Cruise control switch or +/Reset or Right -/Set Mode Distance +* Scroll button Lever Instrument cluster/Back Distance -* Left The audio control switch is operational...
Page 64
Turns panoramic view off if already in Roll the button upward to increase ● ● panoramic view mode, or on if not in volume. panoramic view mode. Roll the button downward to ● Screen mode decrease volume. Switches between the landscape and Press down the button to mute.
Page 65
radio station with a strong signal When Bluetooth is connected, but no ● (turning frequency up). phone number is entered on the Dial screen, press this button to switch to Press the button to select the pre- the Call Log screen. Press this button ●...
Power-Assisted Steering Mode Settings CAUTION The feel of steering assistance varies Avoid pressing honking for too ● ● from person to person, and so do the long, as the horn may be evaluation and needs for this feel. damaged. To set the steering mode, go to ●...
Page 67
Rear fog lights CAUTION Set the light switch to and rotate The light intensity sensor is ● located at the top of the the fog light dial to to turn on rear dashboard panel. Do not block the sensor or let anything splash fog lights.
Page 68
Once turned on, turn signals continue ● flashing even after the lever is released. They will turn off after the turn is complete. Depending on the driver's habit, the turn signal will reset after the vehicle turns around under some extreme conditions. Auto light off Conditions to activate the auto light off ●...
Page 69
When the vehicle is powered on, tap The lighting delay is 10 seconds ● ● by default and can be set on the → Vehicle Settings → Lights to set infotainment touchscreen. With the the delay time. light switch set to , when you unlock and are approaching the vehicle, the corresponding lights keep on for 10...
REMINDER In case there is a collision or ● sensors have been reinstalled, When HMA is activated, the contact a BYD authorized dealer ● HAM indicator light up on the or service provider to calibrate the instrument cluster. sensors, so as to avoid affecting system performance.
Page 71
Push up or pull down the lever to Rear Windshield Wiper and Washer ● select a mode. In slow and fast modes, the wiper Set the wiper switch to to activate ● ● operates continuously. the rear windshield wiper; set it to or open the trunk to stop the wiper.
Driver's Door Switches Power Window Switches When the ignition switch is on OK, all ● the window switches can lift up and down the window. After the vehicle is powered OFF, no power windows can be regulated. The window control switch at the ●...
Page 73
Contacting a BYD authorized ● dealer or service provider for Anti-pinch Function maintenance is recommended if the windows' automatic closing...
Window Lock Button* All doors unlock automatically when ● the vehicle suffers a strong impact, depending on the impact intensity and Press the window lock switch. Only the ● accident type. switches on the driver's side can be used to open/close four windows; the window switches on the rear row are Odometer Switch deactivated.
② BSA switch* CAUTION Press this switch to activate blind spot The hazard warning lights are assist. See for details. ● used to alert drivers and ③ AVH switch* pedestrians of possible risks. Press this switch to activate automatic P118 vehicle hold.
materials such as grass, snow, ice, or CAUTION gravel. Shutting down the ESC system In snow mode, traction and control ● ● may help if the motor features are optimized, and the performance is degraded in soft accelerator pedal is selected with snow conditions by the activation caution.
touchscreen status bar displays To cancel an emergency call made ● by mistake, press the SOS button a . The front passenger second time within five seconds. airbag does not deploy in the event of moderate to severe collisions that meet the necessary deployment conditions.
Status LED Indicator Beeping Ignition off or E-Call system failure Power-on self-check mode Flashing fast - 2 Hz Ignition on and self-check Solid on if self-check is passed passed E-Call connecting Flashing - 1 Hz A beep E-Call connected Flashing - 1 Hz A beep E-Call ended Solid on...
Release the sunshade open button ● WARNING ① immediately after touching it. The sunshade opens automatically. For Keep clear of the sunroof when ● the sunshade to stop at its current it is opening or closing, or severe position, touch the ① or ② button injury may occur.
Page 80
Right interior light button Ambient light lighting area ● Music rhythm ● Press the interior light buttons to turn ● on left/right interior lights. Press again to turn them off. Rear Interior Light Switches* With the vehicle in any power mode, ●...
USING AND DRIVING Charging/Discharging...... 82 Battery..........94 Usage Precautions......98 Starting and Driving......112 Driver Assistance......120 Other Main Functions..... 146...
● the vehicle or charging equipment Charging may affect medical or during charging, stop immediately and ● implanted electronic devices. Consult contact a BYD authorized dealer or the device manufacturer before service provider. charging. Always observe the following charging ●...
Page 84
connector terminal does not get loose or deformed. Hold the charging connector with ● one hand, align the connector with the charge port and push it in, making sure that they are properly connected. These signs refer to standardized ● When charging is complete: charging systems in accordance with ●...
Page 85
can damage the charging equipment The use of A/C may worsen ● and the vehicle if the vehicle is battery temperature control system started with the charging connector performance in DC charging at incorrectly inserted. high temperatures, resulting in lower charging performance and longer Battery temperatures that are too charging time.
Page 86
Vehicle or AC charging light or message on the instrument cluster. charged. connector failure If found, stop charging and contact a BYD authorized dealer or service provider. Warm up or cool down the high-voltage battery. High-voltage battery Keep the vehicle in an environment with...
If there is any fault prompt for the charging pile Vehicle or charging pile or the vehicle, it is recommended to contact a fails. BYD authorized dealer or service provider. Charging Charging time: Refer to the charging ● time message on the instrument cluster or infotainment touchscreen.
Page 88
With the doors unlocked, press the ● WARNING charge port door to open. Store the product in a cool and dry place when it is not in use. When charging, do not place the ● equipment in the trunk, under the front of the vehicle, or near the tires.
Page 89
CAUTION REMINDER relevant charging parameters and theft lock before pulling out the charging sign. the charging connector. The connector has to be pulled out At this time, you can schedule ● within 30 seconds, or the port will smart charging in →...
Page 90
scan the QR code. See the user WARNING manual for charging pile/box for details. Never drop the Mode 2 equipment ● or pull it directly by its cable. The charging connection indicator ● Take caution when moving the lights up on the instrument cluster. equipment.
Page 91
DC charging is achieved by connecting Reinsert the DC charge cap and close ● the vehicle to a DC charger via its the port door. connector. REMINDER Unlock the charge port door, then ● open the port door and cap. When the port cap is fully open, ●...
WARNING REMINDER Never use the discharging device When the vehicle lies idle for ● ● if the power strip cable becomes long periods, it is normal that soft, the charging connector cable intelligent charging takes place. is worn out, the insulation layer Power for intelligent charging is cracked, or any other damage ●...
Charge Port Anti-theft Ensure that the battery capacity of ● the vehicle to be discharged is not Lock below 15%. Ensure the V2L connection device ● In order to prevent the charging ● casing is not cracked, and its plug is connector from being stolen, the free from rust or obstructions.
Emergency Unlocking of the Charge REMINDER Port When the Dynamic driving range When the electric lock fails and ● ● display mode is set: the charging connector cannot be unplugged, try to unplug the charging The driving range that is ●...
You can select the regeneration varies to some extent in the following ● intensity based on the deceleration conditions: sense when releasing the accelerator When SOC is high, the regenerative pedal. Different deceleration senses ● braking performance may decline. deliver different driving experiences. The vehicle switches to trickle The set energy regeneration intensity ●...
Page 96
Usage Tips the fault warning light lights up on the instrument cluster. In that case, It is recommended to use the vehicle at it is recommended to contact a BYD ● temperatures between -10℃ to 40℃. authorized dealer or service provider.
Page 97
High-Voltage Battery Recycling extinguishers. How to scrap an NEV: CAUTION 1. Take the vehicle to the BYD recycling service provider that will assess the To ensure safety of the high- ● residual value of the high-voltage voltage battery, stop the vehicle battery.
Page 98
If the battery voltage is too low, it may ● fluid getting inside. not be able to power on the vehicle. In that case, contact the BYD authorized dealer or service provider promptly. WARNING Check the conditions of the low- ●...
driving is recommended. The following WARNING practices effectively prolong vehicle service life: In case of mouth contact with ● the electrolyte, seek medical Avoid flooring the accelerator pedal ● attention immediately. when starting and driving the vehicle. Keep children away from the low- ●...
Page 100
WARNING WARNING Drivers must be qualified for When a trailer is equipped ● ● towing the total mass (including with an electromagnetic brake, both the vehicle and trailer). confirm with the trailer manufacturer for the installation The vertical load on the device of the electromagnetic brake ●...
Page 101
WARNING WARNING Inflate tires to the specified cold Start the vehicle smoothly and ● ● tire inflation pressure. avoid sudden acceleration and emergency braking, or the Adjust the interior rearview vehicle may be out of control ● mirror and side mirrors to due to slipping especially on a provide clear rear views without slippery road.
Page 102
Unplug the cable and Poor cable connection reconnect it. Trailer light fault Contact a BYD authorized Blown fuse dealer or service provider. Pull over as soon as possible and check whether the cable Accidental disconnection of is properly connected;...
Page 103
Towing mode Equipment ● ① Trailer hitch ② Electrical connection plug 5. Firmly grasp the towbar from the bottom and align the triangle marks on both sides of the towbar with the corresponding cutouts in the towbar housing. 6. Push the hitch into the hitch housing until the knob switch rotates REMINDER counterclockwise by about 110°...
Page 104
CAUTION WARNING The key can be removed only if Use a hitch that matches the ● ● vehicle when towing. the hitch is locked. Do not use the hitch if the key is not removed. Removing the trailer hitch ● REMINDER 1.
Page 105
Use only the electrical connection ● device designed by BYD. Do not Reverse the vehicle with the aid of ● directly splice or connect the the towing assist guide cursor in the...
Page 106
Towing function, and the detection The following driver assistance ● starts 15s later. functions are disabled in towing mode, please drive with caution. Function Category Function Adaptive Cruise Control (ACC) Driver Assistance-Cruise & Navigation Lane Centering Assist Blind Spot Assist Door Open Warning Rear side alarm &...
Function Vehicle Status Indicator Status Indicator Normal Solid blue Trailer Abnormal Solid red No Speeding It is off when the trailer cable is not ● connected. Speeding is a major cause of fatal accidents. Faster speeds generally entail Influence of trailer towing on mileage higher risk.
Page 108
If the tray dented inward or there is Saving Energy and ● scarification under the battery package Extending Vehicle Service tray, it is suggested to check at a BYD Life authorized dealer or service provider. During operation of the vehicle, ●...
2. Maintaining constant speed: increases load on the powertrain and power consumption. Constant speeds save energy. ● Sudden acceleration, sharp turns Keep the bottom of the vehicle clean ● and emergency braking increase and mud free. This reduces vehicle consumption. weight and prevents corrosion.
Page 110
Do not carry highly magnetic For trunk strapping or fastening ● ● items, as they might interfere in supplies, contact a BYD authorized the vehicle's operating functions. dealer or service provider. Roof Rack Carrying Items in the Passenger Area Storing luggage on the roof rack will All items that could be thrown inwards ●...
BYD authorized braking distance. dealer or service provider for testing Drive carefully and avoid and troubleshooting. Do not drive on ●...
Page 112
Fires typically show initial warning ● fire. signs, such as abnormal noises and odors in the vehicle body. When It is recommended to go to a BYD abnormal conditions are found, turn ● authorized dealer or service provider off and stop the vehicle immediately.
Engage the parking brake firmly. Before purchasing and installing snow ● ● chains, consult a BYD authorized Shift to Park or Neutral. ● dealer or service provider where your Carry the correct smart key with you. vehicle was purchased.
Page 114
CAUTION Do not touch the power button ● while driving. Remote Start Before starting 1. The power mode is "OFF". The vehicle is ready to drive when 2. The gearshift lever is on "P". ● the OK indicator lights up on the 3.
The vehicle can brake. Verify that the vehicle maintains also be taken to a BYD authorized dealer a straight direction. or service provider for inspection. Other abnormalities: Check for loose ●...
WARNING When the motor is running and ● the vehicle is in the "R"/"D" gear, always stop the vehicle by stepping on the brake pedal, as there is still force transmitted from the actuator and the vehicle can travel slowly even in its idle condition.
Page 117
Engaging EPB Manually CAUTION Pull up the EPB switch. EPB applies an slope; otherwise the vehicle may appropriate parking force, and flashes slip back. on the instrument cluster and then This function is designed to becomes solid on, indicating that EPB ●...
Page 118
BYD authorized to check the brake pedal switching dealer or service provider immediately. signal and relevant parts and lines. If it cannot be released, contact a BYD...
WARNING To prevent the vehicle from ● moving, the gearshift is not to be used to replace EPB when parking. EPB must be used instead, and the vehicle must be in "P" gear. The EPB switch must not be ● operated when the vehicle is moving.
Slow down when driving against indicator lighting up and gear ● strong winds. shifted into Park Cleaning the vehicle or driving through To activate AVH funtion, shifting into ● ● deep water may wet brakes. To keep Drive to enable the vehicle to move, brakes dry, drive carefully and press and then press the brake pedal until the brake pedal gently.
4. Use anti-freeze washer fluid. Cruise speed and time interval from ● These can be found in the BYD the vehicle ahead can be set by ● authorized dealer or service provider using the cruise buttons. Cruise control and the auto parts stores.
Page 122
it must be checked until such Cruise Button Operation conditions are met. At this time, ACC on/off button displayed on the instrument cluster. Press button ① to activate or exit ACC. ACC activated: (The system is in standby when activation ●...
Page 123
The driver must select a safe vehicle or using the ACC cruise button to ● distance. reactivate ACC. The system adjusts vehicle speed to If the vehicle stops for more than three ● ● keep a suitable distance from the minutes, the ACC system will enter vehicle ahead on the same lane.
Page 124
In this case, it is recommended to contact A short distance from an adjacent lane a BYD authorized dealer or service ● (or a vehicle on an adjacent lane that provider. is too close to the ACC vehicle's lane) may trigger ACC to brake.
Page 125
In any of the following situations, ● the cluster. it is recommended to go to a BYD authorized dealer or service Pre-warning provider for professional calibration ● and verification of the medium range If the vehicle travels at speeds between...
Page 126
system provides additional braking The vehicle is on a sharp curve. ● force to reach the optimal level required to avoid collision or reduce Precautions crash impact. The PEB system cannot ensure zero ● collision. In complex traffic, the system System Limitations cannot always clearly identify all the Detection may be affected or delayed...
Page 127
● The system cannot completely protect kit. ● pedestrians or avoid accidents and Make sure to go to a BYD authorized severe injuries on its own. ● dealer or service provider for Under certain complex conditions, professional calibration of medium ●...
Page 128
system may not work properly and to the recognized speed limit value thus result in accidents. and sensitivity, so that the vehicle will not overspeed. REMINDER Enable or disable TSR in → ADAS ● → Driving Assist. When the vehicle Hereby, Veoneer US, Inc.
Page 129
In case there is a collision or the ● camera sensor has been reassembled, Warnings include: audible warning ● it is recommended to go to a BYD only, or steering wheel vibration*, or authorized dealer or service provider combination*. for sensor calibration so as to avoid affecting system performance.
Page 130
If it does not, it Unidentifiable road boundary with ● is recommended to contact a BYD grass, soil, or curb authorized dealer or service provider. Disabling LSS is recommended in the Precautions ●...
Page 131
provide a safe and comfortable driving With the ICC function enabled and the ● environment. ACC function activated, when vehicle speed is between 60 km/h and 120 When the function is enabled, the km/h: ● driver must always hold the steering wheel and control the vehicle when 1.
CAUTION relevant precautions for ACC and LKS when you are using ICC. Blind Spot Assist (BSA)* The blind spot assist (BSA) system includes the following functions: blind spot detection (BSD), door open warning DOW* (DOW)*, rear collision warning (RCW), rear cross traffic alert (RCTA), and rear Door Open Warning(DOW) detects ●...
Page 133
the driver whether there is a vehicle CAUTION approaching from behind. The BSA system may be unable When the vehicle is reversing, the RCTA ● ● to provide adequate warning on system detects the vehicles traveling target vehicles approaching from in the blind spot at the back through behind at a high speed.
The driver monitoring system is If this is detected, contact a only an auxiliary system and is BYD authorized dealer or service not capable of effective recognition provider. and alarm-raising in all situations. It cannot completely replace the...
Page 135
Driving and prompt messages are Fast air leakage alarm ● ● displayed on the cluster. When there is When the system is running, once no prompt message, driving messages ● one or more tires leak air at a are displayed. You can select the tire rate above a specific value, TPMS pressure display interface by pressing gives a fast air leakage alarm within...
Page 136
BYD authorized dealer or If pressure is found to be ● service provider in accordance with abnormal while driving, check the requirements of the installation the tire pressure immediately.
Tap the radar icon in the panoramic ● WARNING view to enable the radar display, and tap it again to disable. When the and increase the likelihood of tire radar display is enabled, a warning is scrapping. Serious tire damage displayed as the vehicle is approaching can lead to traffic accidents, an obstacle.
WARNING WARNING The panoramic view system is the panoramic view screen will ● only to be used for parking/ be delayed or the screen will driving assistance. It is not safe flash. This is a normal part of the to rely solely on this system to camera power-on process.
Page 139
Reversing Radar Switch You can enable or disable the parking ● sensors with the reversing radar switch* or in → ADAS → Parking Assistance → Parking Sensors . When the ignition is switched on and ● EPB is released, the parking assist system is enabled automatically.
Page 140
⑥ Rear left sensor* Distance Display and Speaker When the sensor detects an obstacle, the location of the obstacle and its general distance from the vehicle will be displayed on the Infotainment screen, and the speaker will beep. Working example of central sensor General distance (mm) Infotainment display Alarm sound...
Page 141
Sensor Detection Information Certain vehicle conditions and ● surroundings may affect the sensors' ability to accurately detect obstacles. Detection accuracy may be affected if: There is dirt, water or fog on the ● sensor. There is snow or frost on the sensor. ●...
If the issue the motor power, and, when necessary, persists, go to a BYD authorized dealer applies braking forces to prevent drive or service provider for inspection. wheels from spinning. It makes it easy for...
Page 143
to intervene more quickly, effectively HDC speed control: ● shortening the brake distance. HDC works at speeds between 11 ● Controller Deceleration Parking(CDP)* km/h and 38 km/h, within which you can adjust the speed by pressing/ When you engage the EPB, the CDP releasing the accelerator or brake function starts working so that the vehicle pedal.
Page 144
pressure of the four brakes, providing control this time rather than executes a smooth stop feeling for the driver. the "OFF" command immediately. ESC is disabled only after the Enable or disable this function in intervention control is complete. ● →Vehicle Settings →...
Page 145
"a firm step ● replacement, it is recommended to and a precise turn". contact a BYD authorized dealer or service provider. When the ABS is working, the brake ● pedal will vibrate, which may produce Tire and suspension handling noise.
Notification. light turns on, stop the vehicle in a safe place immediately and WARNING contact a BYD authorized dealer or service provider If the AVAS prompt sound cannot ● ABS cannot prevent skidding be heard when driving at a low ●...
WARNING Before experiencing this function, ● check if the tire, brake and other vehicle functions are in optimal conditions. Do not use this function when ● visibility is low (e.g. dust, haze and night). Do not use this function on ●...
Page 148
Power Side Mirrors The right side mirror can ● be selected by pressing the corresponding auto Side Mirror Switches regulation switch . There are four directions Folding side mirrors manually ● (i.e. up, down, left and Push the outer edge of a side mirror to right) for regulating lens rotate it around the folding axis to the directions to adjust the...
Page 149
1. Pull up the wiper arm at the driver CAUTION side, and then pull up the other at the passenger side. Lower the wipers slowly and avoid ● direct impact onto the windshield. 2. Press the wiper lock button ①. Do not bend the wiper blade, and 3.
Page 150
IN-VEHICLE DEVICES Infotainment System...... 150 A/C System........152 BYD App...........160 Storage..........161 Other Devices........162...
Infotainment from 0 to 39. A mute icon is displayed when volume is 0. System Reset to factory settings This function factory resets the ● Infotainment Touchscreen infotainment system. During the process, do not touch any ● When the ignition is switched on, the infotainment button or turn off the initial screen is displayed for several power supply, or errors may occur.
Navigation Bar BYD Assistant : returns to the previous page or exits the program. BYD Assistant is an intelligent voice assistant that responds to your : returns to the homepage. voice commands, such as requesting : shows recently opened...
BYD Assistant then performs the Search recognized instruction. Tap Search on the upper left corner ● and enter file names to search for Bluetooth Call target files. Cut / Copy Connection Touch and hold any file, select target ● 1. On Bluetooth Call screen, tap Please...
Page 154
A/C Operation Interface To access the A/C setting interface, go ● → Vehicle Settings → A/C. Remotely controlled air conditioner running time Fan speed reduction during calls Auto A/C mode* Auto air recirculation Automatic purification Fan speed reduction during calls Auto air recirculation Tap this button to enable this setting.
Page 155
Remotely controlled air conditioner Automatic purification running time Tap this button to enable auto ● Tap this button to set the time for purification function. ● remote A/C running. Tap this button a second time to ● Auto A/C mode* disable it.
Driver's temperature control Function Definitions When the "auto air recirculation" ● function is enabled, to ensure air quality in the vehicle and prevent Auto mode the vehicle exhaust from entering the vehicle, the recirculation mode is After tapping this button, its indicator ●...
Page 157
minute inactivity of the associated button. Tap this button a second time to ● disable the function. This function is not for drying ● raindrops or melting snow. REMINDER Using the side mirror electric Usage Precautions ● heating defrosting function for a long time may cause the mirror To quickly cool down the interior after ●...
Page 158
If the odor persists after odor direction. ● prevention methods are used, it is recommended to contact a BYD authorized dealer or service provider for repair. In order to reduce odors from ● the A/C, if the A/C is already...
Rear Side Vents Air Purification System* Move the knob to adjust airflow or to ● The air purification system purifies open/close the vent. airborne PM2.5 particles. When A/C Toggle left/right to adjust airflow is turned on, the system thoroughly ● direction.
Page 160
In-vehicle PM2.5 value and level PM2.5 detection button display PM2.5 Detection Button In-Vehicle PM2.5 Value and Level Display Tap on the "PM2.5 detection" ● The area displays the PM2.5 value and button to activate and detect ● level outside/inside the vehicle. PM2.5 concentration inside/outside in realtime, which will be displayed The PM2.5 value detected by the on-...
Cloud Service App and then the homepage is displayed. CAUTION Tap the A/C card on the BYD app homepage to access the A/C control Provide the email address screen, where you can regulate A/C ●...
3. Turn on or off A/C on the app homepage, or tap the A/C card to perform other settings. 4. At the bottom of the homepage, check status of seats, doors, windows and tires on associated screens by tapping the corresponding icons. 5.
CAUTION When using the cup holder, do not ● start or brake the vehicle suddenly to prevent liquid spillage and burn you or other passengers. Do not place an open cup or ● untightened beverage bottle in the cup holder, so as to avoid liquid spillage while you are driving, opening or closing a door.
REMINDER Correct use of the sun visor ● improves driving safety and comfort. Grab Handles Pull the grab handle down for use. The ● handle returns to its original position Rear-Row USB Ports when released. These ports are for charging only and ●...
Page 165
● smartphone screen-up in the wireless properly, it is recommended to charging area to activate the wireless contact a BYD authorized dealer charger. or service provider. To disable the wireless charger: On the BYD will not assume any ●...
Charging may stop at high ● shifting may be affected. temperatures, and will resume once the temperature drops. Cargo Cover* BYD makes no commitments for ● problems caused by external wireless charging coils. Please use The cargo cover is used for privacy and ●...
Page 167
WARNING even injury/death to the child, can happen.
Vehicle maintenance is performed based on the mileages or months, whichever It is recommended that maintenance ● comes first. be performed in accordance with the standards and specifications of BYD Auto Co., Ltd., and by a local BYD authorized dealer or service provider.
Page 170
Item Interval Check and fasten them every 12 months or 20,000 km and Chassis screws replace damaged ones in a timely manner. Check them at 12 months or 20,000 km for the first time, Brake pedal and EPB switch and every 24 months or 40,000 km afterwards, or every 12 months or 20,000 km in severe driving conditions.
Page 171
Item Interval Check for it at 12 months or 20,000 km for the first time, Wheel bearing clearance and every 24 months or 40,000 km afterwards, or every 12 months or 20,000 km in severe driving conditions. Coolant level in expansion Check for it every 12 months or 20,000 km and replace tank damaged parts in a timely manner.
Page 172
● calibration. You can also contact Driving in congested urban areas at ● a BYD authorized dealer or service temperatures above 32°C for more provider for capacity testing and than 50% of total travel time. calibration.
Check vehicle paint and trims. standards and specifications of BYD ● Auto Co., Ltd., and by a local BYD Any chip or crack found on the authorized dealer or service provider. ● paint must be repaired immediately to prevent corrosion.
BYD authorized dealer or service chemical reactions. provider for repair. The vehicle must be waxed once a ● Check cabin interior. month or whenever water resistance ●...
After raining. ● REMINDER Manual Vehicle Washing Do not use blades or gasoline to ● remove hard dirt from the vehicle Before washing the vehicle, park it in the body. The plastic wheel trim is shade, and wait for the vehicle to cool easily damaged by organic matter.
Page 176
Carpet CAUTION Clean carpets with a good foam When cleaning the inside of the ● ● detergent. rear windows, take care not to scratch or damage electric heating Use a vacuum cleaner to remove as ● wires or junctions. much dust as possible. Several types of foam detergents can be used.
Self-Maintenance For any questions about vehicle ● cleaning, please consult a local BYD authorized dealer or service provider. Self-Maintenance CAUTION Self-Maintenance Precautions If dirt cannot be cleaned off using ● a neutral detergent, clean it with If maintenance is to be carried out by a detergent that does not contain ●...
Page 178
It is recommended to have the front combination lights aligned Brake fluid level - Check the level ● by a BYD authorized dealer or service monthly. provider. Brake pedal - Check whether the brake ● Fogging of lights pedal is operating properly.
Dry the residual recommended to drive the vehicle moisture on the sunroof to prevent it to a BYD authorized dealer or from freezing. service provider for maintenance. 7. Do not open the sunroof fully on extremely bumpy roads.
Otherwise, vehicle has been parked for a year or the vibration between the sunroof and more, go to a BYD authorized dealer the rail may deform related parts and or service provider for comprehensive even damage the motor. And, do not maintenance.
The coolant must always be of the ● same specification as the original, without adding any mixture. Different brands and types of coolant should not be mixed. 2. To open the hood: Lift up the hood and support it with a stay bar. 3.
It is recommended to use certified ● windshield washing fluid. A/C System The A/C system is a closed system, ● and any important maintenance work should be performed by professionals from a BYD authorized dealer or service provider.
If A/C cooling efficiency decreases, go Maintenance Rules ● to a BYD authorized dealer or service provider for maintenance. Clean windshield and blade regularly ● (preferably once a week or once every CAUTION two weeks).
Page 184
maintenance. The wipers rotate Tire pressure should be measured ● down. while tires are at ambient temperatures. This means that it 2. Grasp the upper end of the wiper should be measured at least three arm and carefully lift the wiper arm hours after stop.
Page 185
● vibration while driving at high speeds (above 80 km/h), but not at low speeds, go to a BYD authorized dealer or service provider and check the tires. Replacing Tires and Wheels If a tire has been repaired, be sure to ●...
Page 186
Fuses It is recommended to replace with ● original tires at a BYD authorized dealer or service provider. All vehicle circuits are provided with fuses Replacement of tires with different to prevent short circuit or overloading. ● sizes, road ranges, rated speeds and...
Page 187
REMINDER REMINDER Do not use fuses with amperage BYD authorized dealer or service ● higher than the rated ampere provider. value or any other solution to replace the fuses, as this can Under-Hood PDB Nameplate cause serious damage or even a fire.
Page 188
Ampere (A) Protected Component or Circuit HV all-in-one controller Electric compressor Brake light switch PTC2 PTC1 Rear defroster Front wiper Auxiliary power Auxiliary power HV all-in-one controller...
Page 189
Ampere (A) Protected Component or Circuit Rear body control module ADAS Blower Rear wiper Battery C-EPS Electric fan...
Page 190
Dashboard PDB Nameplate Ampere (A) Protected Component or Circuit Rear body control module Integrated thermal management module Diagnosis port Instrument cluster High-frequency receiving module Gearshift panel...
Page 191
Ampere (A) Protected Component or Circuit Infotainment system External amplifier ADAS Combination switch On-board charger Rear body control module Rear body control module Left front power seat Right front power seat REMINDER REMINDER Fuse amperage (such as the configurations. Maintenance and ●...
Page 192
WHEN FAULTS OCCUR When Faults Occur......192...
Page 193
If the smart key indicator does not flash and the vehicle cannot be started using the start function, the smart key battery may be exhausted. It is recommended to contact a BYD authorized dealer or Emergency Shutdown service provider for battery change as System soon as possible.
Page 194
Vehicle Fire Rescue 2. Call a BYD authorized dealer or service provider and the fire brigade, informing them that the vehicle is In case of fire, continue to operate the equipped with a high-voltage battery vehicle as follows according to the actual pack, and wait for rescue.
Page 195
If any repair is being moved is properly secured required, it is recommended to to prevent it from sliding back. go to a BYD authorized dealer or service provider for repair. Tow Eye The remote control key and high- ●...
Page 196
Be sure to have all passengers get off ● the vehicle and ask them to go to a safe place away from crowded traffic. To prevent slipping, secure the vehicle ● by wedging the tire diagonally against the flat tire. CAUTION Do not continue driving with a ●...
Page 197
WARNING REMINDER Tire sealant is highly flammable vehicles, 100-200 meters away ● and harmful to health. Take from the vehicle. After the repair, necessary precautions to prevent recover the warning triangle for fire and avoid contact with skin, future use. eyes, and clothing;...
Page 198
If the tire pressure does not reach 130 area shown in the figure), turn off ● kPa (1.3 bar), it is recommended to the inflator. You are recommended to contact a BYD authorized dealer or contact a BYD authorized dealer or service provider. service provider. REMINDER Using tire sealant on damaged ●...
Vehicle Data Vehicle Data Vehicle Data Dimensions: Item Parameter Length (mm) 4455 Width (mm, excluding side mirrors) 1875 Height (mm) 1615 Wheelbase (mm) 2720 Front track (mm) 1575 Rear track (mm) 1580 Front overhang (mm) Rear overhang (mm) Approach angle (º) Departure angle (º) Vehicle mass: Item...
Page 202
Item Parameter Type Permanent magnet synchronous motor Drive type Front-wheel drive Rated power/speed/torque (kW/rpm/Nm) 65/4433/140 Peak power/revolving speed/torque 150/4620/310 (kW/rpm/N•m) Power performance: Item Parameter Max. design speed (km/h) Max. gradeability (%) Vehicle economy: Item Parameter Power consumption per 100 km under comprehensive working conditions ≤16 (kWh/100 km)
Page 203
Item Parameter Total front wheel toe-in (°) 0.116±0.16 Kingpin inclination angle (º) 11.47±0.75 Kingpin caster angle (º) 3.23±0.75 Rear wheel camber (º) -1.07±0.5 Total rear wheel toe-in (°) 0.17±0.2 Braking system: Item Parameter Free stroke of brake pedal (mm) ≤5 Reasonable thickness range of front brake 24~26 disc (mm)
Page 204
Item Parameter Brake fluid amount (ML) 1050±50 Seats (when measuring cushion depth): Item Parameter Seatback angle set for front seats 23° Forward and backward moving spaces for 200 mm forward and 60 mm backward from front seats designed position; slide rail inclination: 4.5° Normal service conditions of front Seatback 22.5°...
Vehicle Identification Vehicle Identification Number (VIN) ① Attached on the gearbox VIN is engraved on the lower beam of the front right seat. ② Attached on the sheet metal surface inside the hood ③ Attached on the lower right side of the trunk sheet metal ④...
Information Vehicle Nameplate The vehicle nameplate is attached to the metal sheet surface below the Warning Labels right B-pillar and contains the following information: ① A/C system and cooling fan label Company name, brand, country of ② Battery position label manufacture, vehicle model, seating capacity, year and month of manufacture, drive motor model, peak power of...
Page 207
WARNING Never use a rearward facing child ● restraint on a seat protected by an active airbag in front of it. Death or serious injury to the child can occur. The tire pressure label is attached below the left B-pillar lock ring. High-voltage label ●...
Declarations of Conformity Smart Key CAUTION While affixing the electronic ● labels, do not overlap them with any glass frame or other object. Brazil Model: D0-92/D1-92 This equipment is not entitled to protection against harmful interference and may not cause interference to duly authorized systems.
Page 211
If the Vehicle Needs Towing..Releasing EPB Manually....Indicators and Warning Lights..Infotainment Touchscreen... Installing Child Restraint Systems. Intelligent Cruise Control (ICC)*... Interior Cleaning......Saving Energy and Extending Vehicle Service Life........Seat Belt Overview......Seat Precautions......Seatback Pockets......Lane Support System (LSS)*..Self-Maintenance......
Page 212
Vents..........Wading into Water......Warning Labels......Washer........... Window Control Switch on Passenger Side..........Wiper Blades......... Wireless Phone Charger*....
Page 214
Abbreviations Abbreviation Full Form Abbreviation Full Form Electronic Control Unit Anti-lock Braking System AUTO Automatic Adaptive Cruise Control Universal Serial Bus Economic NORMAL Normal SPORT Sport State of Charge Automatic Vehicle Hold Predictive Electronic Parking Brake Collision Warning Automatic Blind Spot Detection Emergency Braking RCTA Rear Cross Traffic Alert...
Need help?
Do you have a question about the ATTO 3 2023 and is the answer not in the manual?
Questions and answers