BYD TANG 2024 Owner's Manual
  1. Manuals
  2. Brands
  3. BYD Manuals
  4. Automobile
  5. TANG 2024
  6. Owner's manual

BYD TANG 2024 Owner's Manual

Hide thumbs
Table of Contents

Advertisement

Quick Links

Download this manual
OWNER'S MANUAL

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TANG 2024 and is the answer not in the manual?

Questions and answers

Related Manuals for BYD TANG 2024

Summary of Contents for BYD TANG 2024

  • Page 1 OWNER’S MANUAL...
  • Page 2 Foreword Thank you for choosing BYD. To better use and maintain the vehicle, please read this manual carefully and keep it for future reference. Special instructions: BYD Auto Industry Co., Ltd. recommends that you choose genuine spare parts and use, maintain, and repair the vehicle in accordance with this manual.
  • Page 3 (if any) related to this product, or consult the dealer who sold the product to you. Sustainability As a pure electric passenger vehicle, BYD TANG is an environmentally friendly product. Please visit https://reach.bydeurope.com for environmental protection information about the vehicle.

  • Page 4: Table Of Contents

    Figure Index Keys............50 Locking/Unlocking Doors....... 52 Exterior..........7 Smart Access and Start System....60 Dashboard......... 8 Electronic Child Protection Lock.... 61 Doors..........9 Seats..........62 Interior..........10 Seat Information........62 Adjusting Front Seats......63 Safety Adjusting Second-Row Seats....66 Folding Rear Seats........67 Seat Belts.........12 Head Supports.........68 Seat Belt Overview........
  • Page 5 Navigation Bar........165 Electronic Parking Brake (EPB).....121 Gestures and Responses....... 165 Automatic Vehicle Hold (AVH)....124 OTA Upgrade*........165 Key Points for Driving......125 BYD Assistant......... 166 Driver Assistance......126 Bluetooth Call........166 Adaptive Cruise Control (ACC)....126 File Management........166 Intelligent Cruise Control (ICC)..... 130 A/C System........
  • Page 6 Vehicle Condition and Vehicle Braking System........197 Control........... 176 Washer........... 197 Individual Center and Vehicle A/C System..........197 Management..........176 Wiper Blades..........198 Storage.......... 176 Tires............198 Door Bins..........176 Electrical Component......201 Phone Slot..........177 Fuses............203 Glove Box..........177 Push-Type Storage Box......177 When Faults Occur Center Console Cubby......177 Seatback Pockets........

  • Page 8: Exterior

    Figure Index Exterior P209 Trunk If a Tire Goes Flat P194 Using Mode 2 Charging Cable* Lights Using AC Charging Piles Light Switches P196 Using DC Chargers Hood P160 P196 Power Side Mirrors Cooling System P197 Locking/Unlocking Doors Braking System P198 P197 Tire...

  • Page 9: Dashboard

    Dashboard P167 Steering Wheel Switches Front A/C Panel P175 Front Center Vent Mode Switches P177 Glove Box Driver Assistance Switches P120 Gear Shift Controls Hazard Warning Light Switch P164 P177 Infotainment Switch Button 10 Push-Type Storage Box...

  • Page 10: Doors

    Doors Interior Door Handle Power Window Switches Memory System Side Mirror Adjustment Buttons P175 Front Side Vents Child Protection Locks Locking/Unlocking the Trunk...

  • Page 11: Interior

    Interior Light Switches Head Supports Using Seat Belt Adjusting Front Seat with Power P177 Center Console Cubby...

  • Page 12: Safety

    SAFETY Seat Belts.......... 12 Airbags..........15 Child Restraint Systems....22 Anti-theft Alarm System*....29 Data Collection and Processing..30...

  • Page 13: Seat Belts

    The force limiter limits the BYD has highly emphasized that all ● seat-belt restraint force to the occupant's occupants should always fasten their body to a certain extent so as to avoid seat belts while in the vehicle.
  • Page 14 2. Adjust the position of the three-point seat belt. Keeping a proper sitting posture, pull ● the seat belt out so that it is diagonally across the chest. The belt should not go under the arm or across the back of the neck.
  • Page 15 Any unfastened seat belt will trigger After an accident, have the seat this indicator to light up and flash as ● belts checked at a BYD authorized required. dealer or service provider. If the Display of unfastened belt's seat pretensioner function is activated, ●...

  • Page 16: Airbags

    If the above functions are and the airbag system. ● abnormal or fail, contact a Do not disassemble or assemble BYD authorized dealer or service ● airbag components without provider. authorization. When driving, make sure all ●...

  • Page 17: Driver And Front Passenger Airbags

    If this light stays does not reach the airbag deployment on, please head to the nearest threshold, seat belts provide enough BYD authorized dealer or service protection. provider for an airbag system The front airbag deflates immediately inspection.

  • Page 18: Side Curtain Airbags

    conditions are met, the far side airbag deploys to protect the heads and shoulders of the driver and the front passenger. If the impact occurs on the front ● passenger side, the far side airbag deploys even if there is no passenger in the seat.

  • Page 19: Airbag Triggering Conditions And Precautions

    The ECU of the BYD airbag system ● met, the side curtain airbag deploys to has been set up with considerations of protect the head of the occupant on common misuse and road conditions.
  • Page 20 One side of the vehicle is hit by another The tail of the vehicle is hit by another vehicle. vehicle. The vehicle rolls over. Cases When Airbags May Not Be Deployed The vehicle hits a concrete column, tree, or other slim objects. The vehicle hits a wall or a vehicle at a side other than the front side.
  • Page 21 Parts other than the passenger WARNING compartment receive side impact. Airbag Triggering Conditions and Precautions Airbags are designed for ● specific models. Any changes to suspension, tire size, bumpers, chassis and factory-equipped devices may adversely affect the airbag system. Users must not use any parts of the airbag system on other car models;...
  • Page 22 Failure to do so could recommended that any operation result in serious injury or even done to the airbags be performed death. by a BYD authorized dealer or service provider. Do not place any other ● accessories or items within the Airbags can only provide one-time ●...

  • Page 23: Child Restraint Systems

    It is recommended that you contact a BYD authorized dealer or service provider immediately if any of the following situations occurs. The surface of the seat with a Any airbag has deployed.

  • Page 24: Installing Child Restraint Systems

    Installing Child Restraint WARNING Systems system and in this manual to make sure the child restraint is Follow the installation instructions properly installed in the vehicle. provided by the child restraint After the child restraint is manufacturer. Secure the child restraints ●...
  • Page 25 The outboard seats on the second row ● WARNING and the third-row seats are equipped with tether strap anchorages on the Where applicable to use a top ● back. tether strap with the child restraint system, ensure the strap is routed through the hole in the head support before attaching and tensioning the strap to the anchorage point at the base of the...
  • Page 26 the force of rapid deployment of the front passenger airbag will result in death or serious injury to the child. Third-row seat installation position: ● ① Top tether ② Snap hook Always follow the instructions below when using a child restraint on the ③...
  • Page 27 Always follow the instructions below when using a child restraint on a rear seat: When the child restraint system is ● installed on any rear seats, front seats can be adjusted forward to ensure that the child is not in contact with the front seats.
  • Page 28 Seating position Front Front Passenger Passenger Airbag Airbag Activated Deactivated Seating position suitable Forward × -facing universal only belted Seating position Forward suitable × -facing for i- only Size Largest suitable lateral × child restraint system Largest suitable rearward R1/R2X/ R1/R2X/ R1/R2X/ ×...
  • Page 29 Seating position Front Front Passenger Passenger Airbag Airbag Activated Deactivated Suitable × support The front seat must be positioned fully rearward and fully down. The front seat belt upper anchorage should be adjusted to be fully down. If necessary, to ensure the child restraint system has direct contact to the front seatback, the front seatback can be adjusted vertically and/or the head support adjusted or removed.

  • Page 30: Anti-Theft Alarm System

    4. You can leave the vehicle after confirming that the indicator begins to flash. Since unlocking the door from inside the vehicle will activate the system, never let anyone stay in the vehicle with the system enabled. Anti-theft yaw rate sensor* When the anti-theft alarm system is ●...

  • Page 31: Data Collection And Processing

    ● ● some important information on how to unlock the door. personal data is collected and processed when you use a BYD vehicle. Starting the vehicle remotely with a ● valid smart key. For a more detailed overview on data ●...
  • Page 32 ● and read by special equipment. The in-vehicle data will only be ● BYD discloses your personal data to stored in the equipment in the third parties only if this is legally vehicle but can be read out via permissible or you have consented the legally required OBD ("On Board...
  • Page 33 BYD services through the performance status. vehicle's infotainment system network Other devices. Infotainment system BYD is not liable for any such services ● provided by any other party. Depending on vehicle configuration, ● data can be added to the infotainment In such cases, please obtain ●...
  • Page 34 (for example, data can be read from the airbag control unit to clarify an accident). If required by law, BYD may also ● be obliged to disclose data upon request to governmental authorities in your country/region, such as in the investigation of a criminal offence.

  • Page 36: Instrument Cluster

    INSTRUMENT CLUSTER Instrument Cluster......36...

  • Page 37: Instrument Cluster

    Instrument Cluster Instrument Cluster View LCD Instrument Cluster Power meter Speedometer Direction Odometer Gear status Driving range Time State of charge (SOC) Outside temperature Regenerative braking intensity...

  • Page 38: Instrument Cluster Indicators

    ● remains in simple mode after simple mode for safe driving. In those actions have been this mode, the cluster continues taken, promptly contact a BYD to display driving related authorized dealer or service information normally without provider for inspection.
  • Page 39 AVH indicator AVH standby indicator ICC indicator Hill descent control indicator BSD indicator Normal mode indicator OK indicator Economic mode indicator Sport mode indicator AEB indicator High beam indicator AFL indicator Towing mode indicator LDA indicator ACC standby indicator ACC fault indicator Main alarm indicator ABS fault warning light Tire pressure fault warning light...
  • Page 40 Driver monitoring assistance AEB warning light fault indicator CPD indicator/warning light* Zero position indicator light BSD fault indicator LDA fault warning light Anti-theft indicator Seat belt reminder indicator TSR indicator Charging connection indicator High-voltage battery fault Powertrain fault warning light warning light High-voltage battery Coolant overheating indicator...
  • Page 41 A longer monitored by the warning light system. braking distance can present serious In that case, contact a BYD authorized driving hazards, so the vehicle must be dealer or service provider for vehicle towed away for immediate repair.
  • Page 42 In that case, contact a BYD authorized dealer or service provider for vehicle When the tire pressure fault warning inspection as soon as possible.
  • Page 43 BYD authorized dealer or service provider for inspection. When the motor power is limited, this warning light will light up, and Zero position indicator it is recommended to contact a BYD authorized dealer or service provider immediately. If the vehicle loses power due ●...
  • Page 44 If any of the following conditions occurs, the brake pedal to initiate an immediately park the vehicle in a safe emergency stop. place. It is recommended to contact a BYD authorized dealer or service provider. The brake system warning light ●...
  • Page 45 REMINDER steering wheel, pull over immediately, and contact a BYD authorized dealer or The steering system features an service provider. ● electric motor to reduce the force required to turn the steering WARNING wheel.
  • Page 46 In such case, CAUTION it is recommended to contact a BYD authorized dealer or service provider Try not to drive the vehicle when ● for vehicle inspection as soon as the warning light is on.
  • Page 47 The on-board charging system is faulty. In this case, check the charging connection, and Please check the OBC system reconnect the charging equipment. If the fault persists, contact a BYD authorized dealer or service provider. The vehicle may be disconnected from the Please check the data data network.
  • Page 48 Symbol Error message Response The multi-purpose camera is faulty. In this Please check the multi- case, park the vehicle, and contact a BYD purpose camera* authorized dealer or service provider. The function of the multi-purpose camera is Multi-purpose camera limited. In this case, park the vehicle, and...

  • Page 50: Controller Operation

    CONTROLLER OPERATION Doors and Keys......... 50 Seats..........62 Steering Wheel........69 Switches..........74...

  • Page 51: Doors And Keys

    Doors and Keys WARNING The button (coin) battery in the ● Keys smart key is hazardous and both new and used batteries are to be kept away from children at all The vehicle is equipped with times. keys, including electronic smart key, mechanical key (installed in the If swallowed or placed inside any ●...
  • Page 52 CAUTION CAUTION contact a BYD authorized dealer Do not use it near airplanes or ● or service provider. airports. If the electronic smart key cannot People implanted with ● ● operate the door within the pacemakers or defibrillators normal distance, or the key...

  • Page 53: Locking/Unlocking Doors

    In order to ensure vehicle safety, handle it with care. If it is lost, going to BYD authorized dealer or service provider for blocking of the lost card and re- configuration is recommended.
  • Page 54 Locking/Unlocking with Smart Key The wireless remote control is used ● to unlock or lock all doors at a close distance, and complete additional functions. When you enter the active area while ● carrying a registered smart key, press the button on the smart key slowly and firmly to lock or unlock all doors.
  • Page 55 the interior lights will stay on for 15 REMINDER seconds and then go out. If the anti-theft alarm system is armed, To enable or disable key unlock/ ● ● open any door within 30 seconds lock/closing window functions, after unlocking with the smart key. go to →...
  • Page 56 If the anti-theft alarm system is armed, to the designated area on the driver's ● open a door within 30 seconds after side mirror to simultaneously unlock the unlocking. or all doors will relock all the doors. The turn signals flash automatically.
  • Page 57 REMINDER If the trunk release button is ● pressed again while the lid is in motion, it will stop at its current position. Opening/Closing the trunk from the inside When the trunk lid is closed, pull ● the switch once, and the lid will REMINDER automatically unlock and open to the set height (maximum height by...
  • Page 58 CAUTION WARNING Before closing the trunk Please don't carry smart keys ● ● electronically, make sure doors, in case the trunk lid pops windows and sunroof are properly up accidentally in the following closed. situations: You are to place or pick up an ●...
  • Page 59 WARNING In order to prevent serious ● injury, make sure to observe the following precautions: Never try to deliberately activate ● the anti-pinch function. Make sure to alert people nearby ● of the lid motion. Make sure hands and fingers are ●...
  • Page 60 Emergency Vehicle Locking with WARNING Mechanical Key The anti-pinch function may fail ● When the central locking system or the depending on the object shape. smart key fails, use the mechanical key Be especially careful about hand for emergency locking or unlocking. and fingers.

  • Page 61: Smart Access And Start System

    3. Insert the mechanical key into the The smart access and start functions take keyhole, turn it clockwise as far as it effect only when the registered smart key can go, return it to the initial position is within the active area. and pull it out.

  • Page 62: Electronic Child Protection Lock

    Please wait for 10 handle. seconds and start the vehicle again. If the smart access and start system ● cannot work properly due to system failures, bring all smart keys to a BYD authorized dealer or service provider for repair. Saving battery power...

  • Page 63: Seats

    Luggage in the vehicle should not be higher than seatbacks. The head support can only protect ● your head when it is in the proper position. Remember to adjust it to the proper position if it has been moved. WARNING Sitting on a folded seatback, ●...

  • Page 64: Adjusting Front Seats

    Move this switch forward or ● WARNING backward to adjust the seatback angle. Do not adjust the driver's seat ● while the vehicle is in motion, as 2. Seat position adjustment switch unpredictable seat movement can Seat position adjustment includes cause the loss of vehicle control.
  • Page 65 lumbar support adjustment. Pressing CAUTION and holding any of the direction buttons for over two seconds will Releasing the switch stops the ● stop the massage. seat in this position. Do not place anything under the seat as In massage mode, the up and ●...
  • Page 66 Press and hold the "SET" button on ● WARNING the seat memory switch, and at the same time press either "1" or "2" Ensure that no part of your body is ● with a beep to complete the memory within the seat's movement range setting.

  • Page 67: Adjusting Second-Row Seats

    The automatic driver seat function If the ventilators are off after the ● ● can be interrupted by closing the vehicle is powered on, tap the control driver's door while the seat is moving once on the touchscreen to set the backward or by opening the door ventilation level at 2 (high).

  • Page 68: Folding Rear Seats

    Folding Rear Seats Flipping and lowering the seatback ● Pull the cord to straighten the ● seatback. Push the seatback forward/backward ● to fold it. You can fold the seatback forward until the back touches the cushion, or you can fold it backward until reaching the locking position Adjusting the seatback (with a locking click).

  • Page 69: Head Supports

    Head Supports 1. Lifting a head support Hold the adjustment button on the left Adjusting Front-Seat Head Supports and raises the head support to the topmost position. Adjusting a front seat four-way head 2. Unlocking one post support Keep holding the adjustment button, The front row head supports are and use a needle whose diameter is equipped with curved posts for up/down...

  • Page 70: Steering Wheel

    support to a proper position, and release REMINDER the button after hearing a locking sound. tip line with the center line of the head support. After adjusting the head support, ● ensure that it is locked into position. Do not drive the vehicle without ●...
  • Page 71 If the auto away feature is triggered ● WARNING for easy exiting, the auto-return feature will also act after the driver Never adjust the steering wheel ● exits the vehicle and closes the while driving, as this is under risk driver's door.
  • Page 72 Tap Auto to enable automatic steering ● wheel heating or select a heating position to adjust the temperature.

  • Page 73: Steering Wheel Switches

    Steering Wheel Switches Panoramic view Call Screen mode Speech recognition Distance - Right Distance + Scroll button ACC switch Left Lever Mode ICC switch Instrument cluster/Back The audio control switch is accessible +/Reset when the ignition is switched on. Activates the adaptive cruise control ●...
  • Page 74 Sets the current speed to the target When the instrument cluster is in menu ● ● cruise speed. mode: Distance - Roll the button upward to select the ● upper level-2 or level-3 menu items. Reduces the distance from the vehicle ●...

  • Page 75: Switches

    When the instrument cluster is in menu When on the Bluetooth call screen, ● ● mode: press this button to end the call. Mode Press the button to switch to ● level-1 menu and its submenus on Selecting a mode: Press the Mode ●...
  • Page 76 Set the light switch to . The BCM captures the brightness data from the light intensity sensor to automatically turn the position lights and low beam on or off. Rear fog lights Set the light switch to and rotate the fog light dial to to turn on rear fog lights.
  • Page 77 automatically reset. The overtaking light lights, rear fog lights, and high beams turns off. turn off in 10 seconds if the driver's door is closed. When the auto light off function ● is activated, the headlights, position lights, rear fog lights, and high beams turn off in 10 minutes if the driver's door is open.

  • Page 78: Wiper Switch

    The rain sensor automatically controls → Vehicle → Exterior Light ● the operation mode of wipers based on (default: 10 seconds). With the light the rainfall, and it is located in front adjustment switch turned to " ", " of the interior rearview mirror on the "...
  • Page 79 WARNING Turn off the automatic mode ● of wiper during the vehicle washing process, in dry seasons or in rainless weather to prevent inadvertent wiper operation. CAUTION When the wiper stops midway ● Rear Windshield Wipers and Washer for snow accumulation and other reasons, please turn it off, park Set the wiper switch to to activate...

  • Page 80: Driver's Door Switches

    Driver's side power window: Press all ● CAUTION the way down and release the switch to open the window. Lift all the way Check and clean the wiper blades ● up and release the switch to close the at regular intervals. window.

  • Page 81: Odometer Switch

    Side mirror adjustment control completely closed. Press this button to adjust the side ● Contacting a BYD authorized mirror lens to a right position. ● dealer or service provider for maintenance is recommended if...

  • Page 82: Driver Assistance Switches

    Press and hold "Mileage 1" and Press this switch to activate automatic ● P124 "Mileage 2" to clear the mileage vehicle hold. See for details. information. ④ BSD switch Press this switch to activate blind spot P143 detection. See for details. Mode Switches ①...

  • Page 83: Passenger Airbag Switch

    The front passenger airbag indicator is ● CAUTION located on the ceiling. after conditions are back to Always double-check that the switch is ● normal. in the required position for the person sitting in the front passenger seat. ③ Driving mode stick Enable or disable the front passenger ●...

  • Page 84: E-Call Switch

    If the switch is OFF, the passenger ● airbag is still enabled, contact The E-Call system activates ● a BYD authorized dealer or automatically in the event of airbag service provider immediately for deployment or the detection of a maintenance.

  • Page 85: Hazard Warning Light Switch

    Status LED Indicator Ignition on and self-check passed Solid on if self-check is passed E-Call connecting Flashing - 1 Hz E-Call connected Flashing - 1 Hz E-Call ended Solid on Callback time (60 minutes by default) Flashing extremely slowly - 0.2 Hz Hazard Warning Light Switch When the...
  • Page 86 WARNING have their body parts caught in the sunroof. Passengers must refrain from ● sticking hands or their heads out through the sunroof during driving. Failure to do so may result in serious injury or death. Closing the sunshade CAUTION Press and hold the sunshade close ●...

  • Page 87: Interior Light Switch

    the sunshade run to the fully closed position and stall for 0.4 seconds. The sunshade initialization is then complete. CAUTION Throughout the initialization ● process, press and hold the Off button of the sunroof/sunshade switch until the initialization is complete. Rear Interior Lights Interior Light Switch Touch the covers of rear interior lights to...

  • Page 90: Using And Driving

    USING AND DRIVING Charging/Discharging...... 90 Battery..........106 Usage Guidelines......110 Starting and Driving......117 Driver Assistance......126 Other Main Functions..... 160...

  • Page 91: Charging/Discharging

    ● the vehicle or charging equipment Charging may affect medical or when charging, stop immediately and ● implanted electronic devices. Consult contact a BYD authorized dealer or the device manufacturer before service provider. charging. Always observe the following charging ●...
  • Page 92 and push it in, making sure that they are properly connected. When charging is complete: ● Stop charging first and make sure the ● charge port is unlocked. Pull the charging connector. ● The signs refer to standardized ● Do not force the charging connector charging systems in accordance with ●...
  • Page 93 During AC charging, if power supply ● is normal that the charging power resumes after short-time outage of displayed by the instrument cluster the external power grid, BYD charging decreases or fluctuates for a short equipment will re-start charging time. automatically and no re-connection of the charging equipment is required.
  • Page 94 it is very important to charge the vehicle in time and estimate the power demand before driving. Vehicle Charging Method: 1. Using Mode 2 Charging Cable* 2. Using AC Charging Piles 3. Using DC Chargers The charging time of the high-voltage ●...
  • Page 95 Verify that there is fault prompts for the charging Vehicle or charging pile or the vehicle, and contact a BYD authorized equipment fails. dealer or service provider. Charge Port Light discharging status in white, yellow, green, blue, and red respectively.

  • Page 96: Charging

    If the charging/discharging connector ● is not connected, the indicator remains solid white for a period of time. If the vehicle is locked during use, the indicator is on for a period of time and then turns off. When the vehicle is unlocked, the indicator lights up again.
  • Page 97 When charging, do not place the Contact a BYD authorized dealer ● ● equipment in the trunk, under the or service provider, or a BYD front of the vehicle, or near the authorized technician, to select tires. the appropriate power supply...
  • Page 98 REMINDER During charging, the estimated ● remaining time to full charge is displayed on the instrument cluster or infotainment system. It is normal that the remaining time to full charge may vary slightly depending on the temperatures, SOC, and charging facilities. Reservation charging cannot be ●...
  • Page 99 Using AC Charging Piles REMINDER 1. Equipment within 30 seconds, or the port will re-lock. Charge the vehicle using an AC ● charging pile in a public place. You can activate the anti- ● theft lock on the infotainment Charging time: Refer to the charging ●...
  • Page 100 Connect the vehicle port: Store the equipment properly. ● ● Plug the charging connector into the If using an AC charging pile/box, ● ● port and make sure it is tight. place the charging connector in its designated location in the charging Charging settings: pile/box.
  • Page 101 Operate the charging equipment to ● REMINDER start charging. When the port cap is fully open, ● do not close the charge port door. CAUTION If the charging connector cannot ● be removed after unlocking, try a few more unlocking attempts.

  • Page 102: Intelligent Charging

    Please disable this function when using Scheduled charging settings slow AC charging equipment that ① Scheduled charging switch is not certified by BYD. Otherwise, scheduled or immediate charging ② Settings may fail due to no response ③ Charging time...

  • Page 103: Charge Preheating

    REMINDER REMINDER When the vehicle is stored for Charge preheating cannot be used ● ● a long time, the smart charging during charging. function may be activated, which is normal and not a vehicle failure. Charge Port Anti-theft Power for smart charging comes Lock ●...

  • Page 104: Driving Range Display

    If the above functions are ● Emergency Unlocking of the Charge abnormal or fail, contact a Port BYD authorized dealer or service provider. When the electric lock fails and the charging connector cannot be unplugged, Driving Range Display try to unplug the charging connector by manually unlocking the charge port.
  • Page 105 generated energy will be recovered REMINDER to improve the vehicle economy. vary, depending on calculations During driving, energy is recovered ● of the energy consumed the last through regenerative brakes when the vehicle decelerates. For higher time the vehicle is used. efficiency, do not accelerate or The displayed driving range is decelerate the vehicle unnecessarily.
  • Page 106 V2L enables the vehicle to supply ● CAUTION power to external devices. Vehicle- to-load equipment* consists of a For precautions concerning use of ● discharging connector, a power strip, the discharge connection device, a cable, and a discharging connector please refer to the precautions for protective cover.

  • Page 107: Battery

    Battery Ensure the V2L connecting device ● casing is not cracked, and its plug is free from rust or obstructions. High-Voltage Battery Ensure that there is no water or ● foreign material inside the charge port and that metal terminals are The vehicle is powered by a high- ●...
  • Page 108 When charging in low temperatures, temperatures, the SOC may quickly ● the temperature control system jump to 100%. can significantly improve charging capability. See charging precautions Battery Usage Tips for details. It is recommended to use the vehicle at When the vehicle is used at ●...
  • Page 109 High-Voltage Battery Recycling extinguishers. How to scrap an NEV: CAUTION 1. Take the vehicle to the BYD recycling service provider that will assess the To ensure safety of the high- residual value of the high-voltage ●...

  • Page 110: Low-Voltage Battery

    on the vehicle to charge the low- WARNING voltage battery. It is recommended to charge it for more than one hour. to hand over waste high-voltage batteries to the recycling service REMINDER outlet. Anyone who hands over a used high-voltage battery to any The low-voltage battery contains other organization or individual, ●...

  • Page 111: Usage Guidelines

    ● ● frequently stops turning, inspect the and started by the above steps, it vehicle immediately. is recommended to contact a BYD authorized dealer or service provider If the powertrain makes any abnormal ● immediately. sounds, stop the vehicle for inspection.

  • Page 112: Towing Precautions

    Avoid flooring the accelerator pedal software updates. BYD does not ● when starting and driving the assume any responsibility for injuries vehicle.

  • Page 113: Driving Safety Precautions

    Damage caused by towing a trailer is not covered by the warranty. Saving Energy and For detailed towing instructions, ● contact a BYD authorized dealer or Extending Vehicle Service service provider. Life Driving Safety Saving energy is simple and easy, and Precautions ●...

  • Page 114: Carrying Luggage

    Carrying Luggage Prevent emergency braking, and ● subsequent brake wear, by keeping an appropriate distance from This vehicle has multiple storage vehicles ahead, and paying attention ● spaces. to traffic lights. Use the glove box, interior panel and Congested roads increase energy ●...
  • Page 115 normal seat adjustment. Do not stack damaging the sunroof and other items to a height taller than the front components with the beam or the seats' seat backs. luggage. Make sure the glove box is always When installing the roof rack, please ●...
  • Page 116 Driving through deep water may wet ● components, promptly contact brakes. To keep brakes dry, drive a BYD authorized dealer or carefully and press the brake pedal service provider for testing and gently. troubleshooting. After crossing over, press the brake ●...

  • Page 117: Fire Prevention

    Keep a lightweight fire extinguisher in ● out may cause a fire. the vehicle and know how to use it. It is recommended to go to a BYD In order to ensure vehicle safety, a ● ● authorized dealer or service provider fire extinguisher should be equipped for regular vehicle checks.

  • Page 118: Starting And Driving

    Look for the ignition point. If the Lug nuts: Ensure all nuts are fitted and ● ● cabin smokes, do not open the hood tightened. immediately. This will let a large Lighting: Verify that headlights, amount of air in and cause fire ●...
  • Page 119 Starting the vehicle Shift to Park or Neutral. ● The power mode is "OFF". In normal cases, start the vehicle as ● below: The electronic smart key is in the ● vehicle. Engage the parking brake firmly. ● Press and hold the START/STOP button Turn off all unnecessary lights and ●...
  • Page 120 stops and powers off, and turn signals REMINDER flash twice. Auto power on is operational only 3. After the vehicle is started, pressing ● and holding the remote start/stop when the driver's door is opened for the first time after unlocking. button on the smart key for two seconds switches the ignition off.

  • Page 121: Gear Shift Controls

    Gear Shift Controls If the driver's door opens while the ● car is moving ≤ 3 km/h in a "D" / "R" gear state, the gear will automatically The gear position of the gear actuator switch to "P". ● is marked on the gearshift lever as When starting the vehicle, turn the shown.

  • Page 122: Electronic Parking Brake (Epb)

    Current gear Shift to With the ignition With the ignition With the ignition on and vehicle on and vehicle on and vehicle speed ≤3 km/h. speed ≤3 km/h. speed ≤3 km/h. With the ignition With the ignition on, vehicle With the ignition on and the speed ≤3 km/h on and vehicle...
  • Page 123 WARNING automatically when the motor is shut down. Do not release the brake pedal ● early in the process, especially when the vehicle is stopped on a slope, to prevent it from rolling. This function is designed to ● improve the vehicle safety. Engaging EPB Manually Excessive reliance on or frequent use of the function is not...
  • Page 124 If it does not sections, or when the vehicle go off, the EPB or braking system may is driven under severe weather be faulty. In this case, contact a BYD conditions. Be careful to avoid any authorized dealer or service provider possible accident.

  • Page 125: Automatic Vehicle Hold (Avh)

    vehicle reverses (R gear) or travels (D WARNING gear) at a low speed, AVH is suppressed to improve vehicle motion. To prevent the vehicle from ● moving, the gearshift is not to To exit slow-moving mode, push the ● be used to replace EPB when AVH switch or drive at a speed above parking.
  • Page 126 WARNING WARNING With AVH on (indicator in green), The battery is located in the ● ● when the EPB fails to function vehicle's chassis. Make sure to normally, reminders like "Please avoid bumping when driving. check the ESC system" and The driver shall ensure the riding "Please check the EPB system"...

  • Page 127: Driver Assistance

    Cruise speed and time interval from ● ● the vehicle ahead can be set by using These can be found in the BYD ● the cruise buttons. You can set the authorized dealer or service provider cruise control speed within the 30-150 and the auto parts stores.
  • Page 128 Status Description The vehicle speed is not greater than ● 150 km/h. ACC standby: ● Brake pedal is pressed at speed 0; or Once enabled, the system is on ● ● brake pedal is not pressed at speeds standby by default and can be above 0.
  • Page 129 vehicle ahead if the stop is less than WARNING 30 seconds. Please strictly abide by the local If the vehicle stops for a time ● ● speed limit regulations, drive period between 30 seconds and three safely, and do not speed. minutes, press the accelerator pedal or push up lever ①...
  • Page 130 In this case, it is If ACC is activated with the vehicle ● recommended to contact a BYD stationary, the system identifies any authorized dealer or service provider. stationary obstacle ahead and keeps the vehicle still to ensure a safe startup and prevent collision.
  • Page 131 Make sure to go to a BYD authorized ● dealer or service provider for Longitudinal assistance, driven by the ● professional calibration and checking...
  • Page 132 ICC activated: default, when the function is activated, ● the current speed is set as the cruise The ICC system is operational. speed. If the current speed is below ● It maintains the set speed or 30 km/h, the cruise speed is set to 30 automatically adjusts the distance km/h.) from the vehicle ahead.
  • Page 133 shows activated status on the WARNING instrument cluster. Influence of weather, road The ICC system is a driving assistance ● ● conditions, and other factors may system, not an automatic driving cause ICC to fail. system. The driver should keep control of vehicle at all times, and their hands Use ICC based on your needs, ●...
  • Page 134 If you disable AEB manually by A bicycle or motorcycle in front ● ● travelling at a low speed in the same pressing buttons, is displayed on direction as the vehicle the instrument cluster. A bicycle or motorcycle crossing in ●...
  • Page 135 that the emergency braking can always vehicles or pedestrians. It may trigger be activated in every scenario. unnecessary warning or braking action for well covers, iron plates or road The system may be affected or give no signs. ● response in the following cases: Make sure to drive safely and observe ●...
  • Page 136 ● kit. conditions, the driver must take timely and effective control of the vehicle Make sure to go to a BYD ● under dangerous conditions. authorized dealer or service provider for professional calibration of the The system cannot completely protect ●...
  • Page 137 Front Cross Traffic Alert that the emergency braking can always be activated in every scenario. (FCTA) & Front Cross While the system provides assistance Traffic Braking (FCTB) ● in monitoring front left and right sides, it cannot replace the driver's Front cross traffic alert (FCTA) and observation and judgment.
  • Page 138 If this value applies to the lane, is detected, contact a BYD authorized displayed. dealer or service provider. If the TSR system malfunctions, WARNING ●...
  • Page 139 ● performed after it is confirmed (by camera sensor has been reassembled, toggling down the lever ①). it is recommended to go to a BYD authorized dealer or service provider for sensor calibration so as to avoid affecting system performance.
  • Page 140 The intelligent cruise control system With the function enabled, when you ● ● is a driving assistance system, so the set the light switch to the auto lights driver should keep control of vehicle at position, the light meets conditions, all times.
  • Page 141 ● sensor has been reassembled, it power steering (EPS) system to prevent is recommended to go to a BYD lane departure. authorized dealer or service provider If LDP system is activated for over for sensor calibration so as to avoid ●...
  • Page 142 If it does not, it Lane lines obscured by tree shadows ● is recommended to contact a BYD on roads in direct sunlight on sunny authorized dealer or service provider. days Disabling the LDW is recommended ●...
  • Page 143 Situations where lane lines may not be lines. The system activates EPS system ● identified include, but are not limited to provide reverse torque, keeping the vehicle in the current lane. Unclear lane lines ● How to Use Incomplete lane lines ●...

  • Page 144: Blind Spot Assist (Bsa)

    Blind Spot Assist (BSA) Precautions Situations where lane lines may not be ● identified include, but are not limited The blind spot assist (BSA) system includes the following functions: blind spot detection (BSD), rear cross traffic Pedestrians, animals, and specialty ●...
  • Page 145 RCTB When the blind spot assist system is ● disabled, no relevant indicators are When the vehicle is reversing at a speed displayed on the instrument cluster. no more than 9 km/h, the RCTB system detects the vehicles traveling in the side When the blind spot assist system ●...

  • Page 146: Head-Up Display (Hud)

    BSD's rear corner vehicle when it is reversing at a low mmWave radars can degrade system speed. performance. If this is detected, contact a BYD authorized dealer or System Limitations service provider. The activation of the RCTB system WARNING ●...
  • Page 147 To enable or disable HUD, go ● CAUTION to infotainment touchscreen → Vehicle → HUD. By factory default, No water or other liquid is allowed ● the switch is toggled on and a HUD to flow into the opening of the image is displayed.
  • Page 148 Driver fatigue warning Driver monitoring assistance is ● disabled. With the vehicle speed meeting the ● system activation condition, driver The camera is obstructed or the slide ● fatigue warning enabled and the cover is not fully open. camera unobstructed, when the The camera is directly exposed to system detects signs of fatigue, such ●...

  • Page 149: Tire Pressure Monitoring

    Tap Off to deactivate the alarm in this ● CAUTION trip. The system may not be able Tap Delay to extend the alarm (for five ● ● to trigger an alarm or switch minutes) in this trip. on the A/C if the SOC is low. Tap the exclamation mark for more Keeping the vehicle at high SOC is ●...
  • Page 150 If the module will not transmit data alarm persists for a long time, please to the display until the next contact a BYD authorized dealer or monitoring. In this case, the service provider. vehicle may be out of control. If...

  • Page 151: Acoustic Vehicle Alerting System (Avas)

    → Vehicle → CAUTION Notifications. Please go to a BYD authorized After a sound source is chosen, tap ● dealer or service provider to re- PLAY to get an acoustic impression. match the tire pressure. The sound is played for five seconds at each tap.
  • Page 152 After the vehicle starts, the image ● before last power-off is displayed on the transparent panoramic view screen. Foreign bodies shown may be inconsistent with the actual ones in the underbody and surrounding blind areas. The underbody image update will begin only after the vehicle has started to run and will be complete when the vehicle has been driven beyond its length.

  • Page 153: Parking Assist System

    sensors, and prompts the driver with CAUTION the proximity of obstacles by an image on the infotainment touchscreen* and comparison with the actual a speaker alarm. object. The parking assist system helps The distance to an object ● ● with reversing. Pay attention to the displayed on the panoramic view environment behind and around the screen may be different from the...
  • Page 154 Sensor Type ⑥ Rear left corner sensor When the sensor detects an obstacle, ● an image is displayed on the infotainment touchscreen according to the location of the obstacle and its distance from the vehicle. When the driver conducts parallel ●...
  • Page 155 Therefore, be sure to observe the vehicle's surroundings at all times. Do not rely solely upon the system. Contact a BYD authorized dealer ● or service provider for inspection Error message as soon as possible in the event of Failure of the parking radar system is the error message.

  • Page 156: Driving Safety Systems

    The sensor has been repainted. an obstacle or is interfered. If the issue ● persists, go to a BYD authorized dealer The vicinity is noisy due to honking ● or service provider for inspection.
  • Page 157 information as steering wheel's angle brakes at a constant deceleration (0.4 g and vehicle speed, and continuously if EPB is engaged but the brake pedal is compares with the actual condition. If not pressed, and 0.8 g if EPB is engaged the vehicle swerves from the normal and the brake pedal is pressed) until the lane, the VDC corrects the situation by...
  • Page 158 In some special conditions, such as Brake disc wiping ● ● at a long stretch of downhill, the Brake disc wiping function: When the HDC function may be temporarily ● wiper switch is on or the rain sensor unavailable due to high brake detects rain, the integrated brake temperature.
  • Page 159 Neither ABS nor ESC will work ● properly if the vehicle is fitted with different tires. For details on tire or wheel ● replacement, it is recommended to contact a BYD authorized dealer or service provider. Tire and suspension handling ●...
  • Page 160 It is recommended to contact a BYD authorized dealer or service provider. In this case, if brakes are applied, ● the ABS will not work and the When the ABS is working, the ESC ●...

  • Page 161: Other Main Functions

    Other Main Power Side Mirrors Functions Use the associated switches to adjust the side mirrors to see the sides of the vehicle using. Interior Rearview Mirror Selection switches: used to select the ● side mirror to be adjusted. Move the interior rearview mirror up or down, left or right to a suitable position.
  • Page 162 Wipers Inspect front/rear wiper blades for cracks or partial hardening at least every six months. If these findings are noted, wiper blades should be replaced. Otherwise, the windshield will streak or will be left unclean after wiping. Replacing Wiper Blades Side mirror reversing assist With the ignition on, turn on the The side mirrors automatically flip down...

  • Page 163: Snow Chains

    3. When installing a new wiper blade, Before purchasing and installing snow ● follow the reverse procedure. chains, consult a BYD authorized dealer or service provider where your vehicle was purchased. After snow chains are installed, be sure ● to travel at a speed below 30 km/h on snow-covered roads.
  • Page 164 IN-VEHICLE DEVICES Infotainment System...... 164 A/C System........167 BYD App...........175 Storage..........176 Other Devices........179...

  • Page 165: Infotainment System

    Infotainment This function factory resets the ● infotainment system. System During the process, do not touch any ● infotainment button or turn off the power supply, or errors may occur. Infotainment Touchscreen The process takes two to five ● minutes. When the ignition is switched on, the initial screen is displayed for several WARNING...

  • Page 166: Navigation Bar

    It is recommended to contact a ● OTA Upgrade* BYD authorized dealer or service provider in the event of a failure. The vehicle software can be upgraded. ● Navigation Bar You can go to the infotainment touchscreen →...

  • Page 167: Bluetooth Call

    4. Set Bluetooth when connection is complete. BYD Assistant Bluetooth Call Go to the dialing screen when Bluetooth BYD Assistant is an intelligent voice is connected. assistant that responds to your voice commands, such as requesting Tap Contacts, Call log, and Missed ●...

  • Page 168: A/C System

    A/C System Touch and hold any file, select target ● files and operation (copy, move or delete), and then go to the edit status. A/C Buttons Rename Touch and hold any file, select ● Front Row A/C Buttons Rename in dialog displayed, rename the selected file, and then tap OK.
  • Page 169 A/C Operation Interface Front A/C Operation Interface Front A/C controls Air distribution Rear A/C controls Anion A/C ON/OFF Front passenger's temperature control Auto mode Fan speed control Cooling Independent control Max cooling Driver's temperature control Front windshield defroster A/C setting Defroster for rear windshield &...

  • Page 170: Function Definitions

    Rear A/C Operation Interface Rear A/C controls Air distribution A/C ON/OFF A/C temperature control Auto mode Fan speed control Rear button lock Function Definitions Max cooling Tap this button to switch the A/C to ● the maximum cooling control mode. Auto mode The temperature is set to "Lo", the After tapping this button, its indicator...
  • Page 171 Front windshield defroster Tap this button. is displayed, and ● Tap this button to enter the front the circulation mode is recirculation. ● windshield defrost mode, distributing Tap this button for the second time. air to the front windshield and side ●...
  • Page 172 Fan speed control on the front/rear A/C (The front AC needs to be on during ● interface cooling) Tap the chosen position. The more The vehicle exits auto control if fan ● ● bars illuminated, the faster the fan speed or air distribution is set, and speed.
  • Page 173 In dusty or windy driving conditions, is recommended to contact a ● close all windows, and turn on A/C BYD authorized dealer or service fans when driving in dusty or windy provider for repair. conditions. In order to reduce odors from ●...

  • Page 174: Air Purification System

    Air Purification System REMINDER keep running for a while after the The air purification system purifies vehicle is powered off and locked. airborne PM2.5 particles. When A/C That is because the condensed is turned on, the system thoroughly water on the surface of the removes PM2.5 particles from the air evaporator needs to be dried to blown into the cabin.
  • Page 175 A/C Settings Tap a second time to deactivate it. ● Outside PM2.5 value and level To access the A/C setting interface, go ● The area displays the PM2.5 value and ● → Vehicle → A/C. level outside the vehicle. ① Auto A/C mode In-vehicle PM2.5 value and level display Two options are available: economical...

  • Page 176: Byd App

    BYD independently. It allows you to control the vehicle remotely and check vehicle conditions, delivering cloud era experience of IoV. Search for "BYD" in Google Play or App Front Side Vents ● Store to download and install BYD app. Turn the roller to increase/reduce air ●...

  • Page 177: Storage

    Provide the email address The control function of the app ● ● registered at the BYD authorized is mainly for remote use. To use dealer, or registration will fail. this function, ensure your phone and vehicle are connected to the In the app, select a country or Internet.

  • Page 178: Glove Box

    Phone Slot Every door (driver's door excluded) is equipped with a phone holder for phones or other small items. Center Console Cubby To open the center console cubby, ● press the front left and right buttons on the inner side of the cubby to automatically turn covers.

  • Page 179: Seatback Pockets

    REMINDER braking, keep the center console cubby closed while driving. Seatback Pockets There are seatback pockets at the back of the front seats for magazines and newspapers. (The seatback pockets on Second-Row Seat Cup Holder your actual vehicle may differ.) 1.

  • Page 180: Other Devices

    Vanity mirrors are installed on the ● CAUTION driver's and front passenger's sun visors. Do not start or brake the vehicle ● suddenly when the cup holders Flip down the sun visor and slide the ● are being used to prevent spillage mirror cover open for use.

  • Page 181: Usb Ports

    ② Type-C fast-charge port CAUTION The power outlet can be used only when Do not hang any heavy objects on the ignition is on. ● the grab handle or the hook to avoid personal injury or damage. Please hang clothes directly on ●...
  • Page 182 Wireless Phone Charger The wireless phone charging area is ● located at the front of the center console cubby. To activate/deactivate wireless charging, tap the wireless charging icon on the shortcut page after sliding down the top status bar on the infotainment touchscreen.
  • Page 183 BYD makes no commitments for together with the phone. ● problems caused by external To avoid damage to the charger wireless charging coils.
  • Page 184 If it is still impossible to charge the phone, contact a BYD authorized dealer or service provider. After power-off, if the phone is ● still charging and the driver's door...

  • Page 186: Maintenance

    MAINTENANCE Maintenance Information....186 Regular Maintenance......187 Self-Maintenance......192...

  • Page 187: Maintenance Information

    Maintenance Information Maintenance Cycle and Items Maintenance Schedule Vehicle maintenance is performed based on the mileages or months, whichever comes first. Item Interval Brake friction block and disc Check every 24 months or 30,000 km Brake piping and hoses Check every 24 months or 30,000 km Steering wheel and tie rod Check every 24 months or 30,000 km Drive shaft boot...

  • Page 188: Regular Maintenance

    You can also contact a BYD authorized Specified maintenance records: ● dealer or service provider for Try to have the BYD authorized capacity testing and calibration. ● dealer or service provider record all specified maintenance operations, For any of the following severe ●...
  • Page 189 Therefore, you are recommended to send the Do not continue driving a vehicle ● vehicle to a BYD authorized dealer or that has not been inspected, as service provider as soon as possible: this may result in serious vehicle damage and personal injury.
  • Page 190 Do not place greasy surface, it is recommended to go to tools or rub with organic solvents a BYD authorized dealer or service on the vehicle body so as to avoid provider for repair. chemical reactions.

  • Page 191: Vehicle Cleaning

    precautions. Chrome finish should be out according to the manufacturer's polished and waxed as well as painted instructions. Soak a soft cloth with finish. cleaning solution and gently wipe it down along the direction of the water flow. Do not wipe in a circular motion CAUTION or horizontally.

  • Page 192: Interior Cleaning

    or a brush, scrubbing in a circular CAUTION motion. Do not use abrasive cleaning Do not use plain water, and keep the ● ● agents to scrub the bumper. carpets as dry as possible. Clean polished metal parts with ● Seat Belts carbon cleaner and wax them regularly for protection.

  • Page 193: Self-Maintenance

    Dry the leather in a well- ventilated, cool place. Self-Maintenance Precautions For any questions about vehicle ● cleaning, please consult a local BYD If maintenance is to be carried out by authorized dealer or service provider. ● the owner, be sure to follow the correct steps specified in this section.
  • Page 194 Note that improper and incomplete ● CAUTION maintenance will affect the good use of the vehicle. Beware of short circuits, as some ● circuits and vehicle components This section only lists instructions on ● carry high current or voltage. simple maintenance items that can be done by the owner.
  • Page 195 In that case, turn on the headlight to be realigned. It is recommended to or turn signal while driving. The have the headlights aligned by a BYD fog will evaporate after a short authorized dealer or service provider. period of driving.

  • Page 196: Sunroof Maintenance

    (preferably monthly). If the vehicle from distorting even damaging the has been parked for a year or more, strips and water from leaking into the go to a BYD authorized dealer or vehicle. service provider for comprehensive maintenance. The sunroof freezes easily in winter.

  • Page 197: Cooling System

    parts. Instead, warm up the vehicle WARNING and turn on the A/C system to accelerate the melting of snow and Ensure that the hood is closed ● ice on the sunroof. Try to open the and locked firmly. Otherwise, the sunroof after the temperature inside hood may suddenly open during reaches a certain level.

  • Page 198: Braking System

    A/C System The A/C system is a closed system, ● and any important maintenance work should be performed by professionals from a BYD authorized dealer or service provider. Owners can perform the following ● operations to ensure that the A/C It is required that the level in system works effectively.

  • Page 199: Wiper Blades

    Maintenance Rules If A/C efficiency decreases, go to a BYD ● authorized dealer or service provider for maintenance. Clean windshield and blade regularly ● (preferably once a week or once every two weeks). CAUTION Wipe the wiper regularly (preferably Whenever the A/C system is ●...
  • Page 200 If you must drive load index, and speed rating as those the vehicle before the tire pressure is originally provided by BYD. measured, tires can still be considered Winter tires must have adequate tread at ambient temperatures as long as the ●...
  • Page 201 Tires must be (above 80 km/h), but not at low replaced if any of the case happens. speeds, go to a BYD authorized dealer or service provider and check the tires. Replace the tire if there are cracks on ●...

  • Page 202: Electrical Component

    New wheels are available for purchase at a BYD authorized dealer or service provider. Please consult a BYD authorized dealer or service provider before replacing the wheels.
  • Page 203 WARNING WARNING contaminated part with a soaked Keep children away from the ● sponge on the way to a hospital if low-voltage battery. possible. Checking the Low-Voltage Battery If electrolyte contacts bare skin, ● Exterior thoroughly rinse the contact area. Seek medical assistance Check for corrosion, loose joints, cracks, immediately if you experience any and loose pressing tools on the low-...
  • Page 204 The positive PDB is under the front ● CAUTION passenger's seat and beside the low- voltage battery. Charging the low-voltage battery ● during cable connection may Replacement of blown fuses with ones ● seriously damage the electronic of higher amperage can significantly control unit (ECU) and other increase the likelihood of damage to electrical components.
  • Page 206 WHEN FAULTS OCCUR When Faults Occur......206...

  • Page 207: Reflective Vest

    It is recommended activated and the HV system will shut to contact a BYD authorized dealer or down automatically: service provider for battery change as soon as possible. In this case, you may Any air bag fails to deploy after a ●...
  • Page 208 Vehicle Fire Rescue 2. It is recommended to call immediately a BYD authorized dealer or service provider for rescue. In case of fire, continue to operate the 3. Carry out a simple inspection, if vehicle as follows according to the actual...
  • Page 209 Users must not repair the vehicle's high-voltage system by themselves. If any repair is required, it is recommended to CAUTION go to a BYD authorized dealer or service provider for repair. When using a flatbed device, ● make sure the vehicle is securely The remote control key and high- fastened to prevent it from sliding.
  • Page 210 The towed vehicle must be ● controlled by a driver inside the cabin, with the steering and braking systems in normal conditions. CAUTION Rescuing a stuck or high-centered ● vehicle by using the tow eye is prohibited. Instead, calling a professional rescue or the customer service number is If the vehicle needs rescue, call a ●...
  • Page 211 CAUTION severe damage for the tire to be repaired. In-Vehicle Tools In-vehicle tools are stored in a tool box under the trunk cover flap. In-vehicle tools include warning triangle, reflective vest, wheel nut cap removal clamp, tire Using Tire Repair Kit puncture sealant kit, tow eye and anti- theft lug nut socket*.
  • Page 212 ● kPa within 10 minutes (red area shown in the figure), turn off the inflator. You How to Use are recommended to contact a BYD authorized dealer or service provider. Refer to labels on the inflator for usage ● of the kit.
  • Page 213 2. Take out the anti-theft wheel nut kPa, it is recommended to contact socket ① from the tool kit and connect a BYD authorized dealer or service it to the wheel nut ②. After loosening provider. the socket, the anti-theft wheel nut can be removed.

  • Page 214: Specifications

    SPECIFICATIONS Vehicle Data........214 Information........218 Declarations of Conformity.... 221...

  • Page 215: Vehicle Data

    Vehicle Data Vehicle Data Dimensions Item Parameter Model BYD6490SBEVB Length (mm) 4970 Width (mm, excluding side mirrors) 1955 Height (mm) 1745 Wheelbase (mm) 2820 Front track (mm) 1650 Rear track (mm) 1630 Front overhang (mm) 1040 Rear overhang (mm) 1110 Approach angle (°) ≥19.5 Departure angle (°)
  • Page 216 Item Parameter Front: TZ200XSU Model Rear: TZ200XSE Type Permanent magnet synchronous motor Drive type Front: 65/4400/135 Rated power/speed/torque (kW/rpm/Nm) Rear: 65/4775/130 Front: 180/15000/350 Peak power/speed/torque (kW/rpm/Nm) Rear: 200/15000/350 Vehicle power performance and economic efficiency Item Parameter Model BYD6490SBEVB Max. design speed (km/h) Max.
  • Page 217 Item Parameter Kingpin inclination angle (°) 11.13±0.75 Kingpin caster angle (°) 2.78±0.75 Rear camber (°) -0.75±0.75 Rear toe-in (°) 0± 0.16 Braking system Item Parameter Model BYD6490SBEVB Free stroke of brake pedal (mm) ≤5 Front brake disc standard thickness (mm) Front brake disc minimum thickness (mm) Rear brake disc standard thickness (mm) Rear brake disc minimum thickness (mm)
  • Page 218 Item Parameter 14.5° forward and 40° backward from the Normal service conditions of front designated position; 200 mm forward and seatbacks 45 mm backward from the slide rail; slide rail inclination: 4.5° Forward and backward moving spaces 40 mm forward from the farthest slide rail for second-row seats (seat cushion depth stroke measured)

  • Page 219: Vehicle Identification

    CAUTION The recommended oil types have ● been tested and approved by BYD. Using other types may result in vehicle performance degradation, and even malfunction or component damage. Information ⑨ Engraved under the front passenger's seat Vehicle Identification Vehicle Identification Number(VIN) ①...

  • Page 220: Warning Labels

    The tire pressure label is attached below Vehicle Nameplate the left B-pillar. The vehicle nameplate is located at the lower sheet metal sink of the right B- pillar. The representative information label is attached at the lower sheet metal sink of the left B-pillar.
  • Page 221 The refrigerant refill and cooling fan The hood opening mark is attached labels are attached on the left side of the below the A-pillar and on the left of the hood lock ring, and the battery position hood handle. indication label on the right side of this ring.

  • Page 222: Declarations Of Conformity

    RF Modules are in compliance with Directive 2014/53/EU. The full text of the EU declaration of conformity is available at the following Internet address: https://cn- prod.byd.com/eu/eu-doc. Smart Key Uzbekistan Model: D1-92 EU countries Model: D1-92...
  • Page 224 Charging Precautions..... Charging Safety Warnings....A/C Control Panel, Car Speakers, Child Presence Detection (CPD)... Dashboard, Control Panel and Child Restraint Systems....Switches........About BYD App......Account Registration....Acoustic Vehicle Alerting System (AVAS)..........Data Collection and Processing..Active Suspension Mode....Discharging Instructions....
  • Page 225 Front Cross Traffic Alert (FCTA) & Front Cross Traffic Braking (FCTB)..LCD Instrument Cluster....Front Interior Lights......Leather.......... Front Seat Cup Holder....Light Switches......... Front Seat Side Airbags....Lights..........Front Side Vents......Loading the Trunk......Front Windshield Wipers and Washer Locking/Unlocking the Trunk..
  • Page 226 Push-Type Storage Box....Vehicle Cleaning......Vehicle Corrosion Prevention..Vehicle Data........Vehicle Identification Number (VIN) ............Rear Windshield Wipers and Washer ............Regular Maintenance....Roof Vents........Wading into Water......Warning Labels......Warning Lights/Indicators Description........Saving Energy and Extending Vehicle Winter Driving Precautions..Service Life........
  • Page 228 Abbreviations Abbreviations Full Form Abbreviations Full Form Blind Spot Detection Event Data Recorder International Standards ISOFIX Emergency Locking Retractor Organization Fix Electronic Control Unit Supplemental Restraint System Rear Collision Warning Blind Spot Assist ELKA Emergent Lane Keeping Assist Lane Departure Prevention Lane Departure Warning Lane Departure Assist RCTB...
  • Page 229 Abbreviations Abbreviations Full Form Full Form Anti-lock Braking System Vehicle Identification Number Traffic Sign Recognition FCTB Front Cross Traffic Braking FCTA Front Cross Traffic Alert Door Open Warning Automatic Emergency Braking Forward Collision Warning Intelligent Cruise Control Adaptive Cruise Control...
  • Page 230 Edition date: 09.2024 EN_V2...

This manual is also suitable for:

Atto 3 2024

Table of Contents

Save PDF