Nortel Switched Firewall 2.3.3 User's Guide and Command Reference
Table 88 Firewall Maintenance Menu (/maint/fw) (Continued)
Command Syntax and Usage
unldplcy
This command is used to unload the current firewall policies.
N
wall. Remember to push your firewall policies from the Check Point SmartDashboard
after you have re-established trust.
clearlog
This command clears all firewall log files.
peakconnec
This command is used to display the Check Point connection table statistics for all fire-
walls in the cluster.
policy
This command lists all the Check Point policies currently installed on the firewall.
status
This command displays the firewall status such as, policy and traffic information.
370
Command reference
–
Unloading the firewall policies allows all traffic to pass through the Nortel Fire-
OTE
213455-L, October 2005