Nortel Switched Firewall 2.3.3 User's Guide and Command Reference
/cfg/fw/smart
SmartUpdate Configuration Menu
[SmartUpdate Configuration Menu]
The SmartUpdate Configuration Menu is used to enable/disable support for Check Point
software updating using the SmartUpdate utility. SmartUpdate is an optional module for VPN-
1/Firewall-1 that automatically distributes software applications and updates for Check Point
and OPSEC Certified products (such as the Nortel Firewall). You can also use SmartUpdate to
manage product licenses.
Table 82 SmartUpdate Configuration Menu (/cfg/fw/smart)
Command Syntax and Usage
ena
Enables support for SmartUpdate on the Switched Firewall.
dis
Disables support for SmartUpdate on the Switched Firewall.
/cfg/misc
Miscellaneous Settings Menu
[Miscellaneous Settings Menu]
The Miscellaneous Settings Menu is used to turn on or off configuration warning messages.
Table 83 Miscellaneous Settings Menu (/cfg/misc)
Command Syntax and Usage
warn y|n
This command is used to turn on or off warning messages. When enabled (the default),
whenever the global apply command is issued, applicable warning are displayed if
problems are found in the pending configuration changes. Warnings will not cause the
apply command to fail, but can be helpful for managing configuration issues.
364
Command reference
ena
- Enable Smart Update Mode
dis
- Disable Smart Update Mode
warn
- Enable warnings when configuration is applied
213455-L, October 2005