Removing Incoming Port Access; Table 8 Add Incoming Port Dialog Box Items - Nortel BayStack Instant Internet 100-S Using Manual

Table 8 Add Incoming Port dialog box items

Item
Allow
Do not allow
Type
IP Address
Port
Ending Port
5
Do one of the following:
• To allow access to the incoming port, click Allow.
• To deny access to the incoming port, click Do not allow.
6
Select a Type.
7
Specify an IP Address.
8
Specify an Incoming Port.
9
Specify an Ending port.
10 Click OK.

Removing incoming port access

To remove an incoming port from the list:
1
In the Admin window, select a group folder or user icon.
2
On the toolbar, click Change.
The Change Settings of User dialog box opens
Using the BayStack Instant Internet Management Software Version 7.11
Chapter 2 User access administration
Description
Allows access.
Denies access.
• TCP – connection oriented
• UDP – connectionless
• Both – TCP and UDP
Enter the IP address of the host name. If you do not know the IP
address, you can enter the host name and select the Lookup IP
Address button. Instant Internet looks up the IP address of the
specified host name.
Select a port number. If you are specifying a range of ports, this is
the beginning port number.
To enter a range of ports, select an ending port number.
(Figure 36).
79