Nortel BayStack Instant Internet 100-S Using Manual page 55

When a user accesses Instant Internet, Instant Internet searches the user database
in this sequence:
1
Instant Internet determines if the user has an Instant Internet user profile.
2 Instant Internet determines if the user's groups are configured as Instant
Internet groups. If the user has an Instant Internet user profile or is a member
of one or more Instant Internet groups, Instant Internet uses the most
restrictive access attributes.
3
If Instant Internet finds no Instant Internet group or user profile for the user, it
designates the default Instant Internet user profile settings as the user's
Internet access settings.
Note: Any users not assigned specifically to a group or who do not have
an Instant Internet user profile automatically assume the default Instant
Internet user profile and are identified by their IP address. Refer to
"Setting up IP users not using iiLogin" on page
Use the Change option to limit or expand user and group Internet access. It is most
common to change Internet access for a group rather than for an individual user,
unless a particular user has unique Internet access requirements. Changing access
for a group simultaneously changes the access of each user in the group.
To change user or group access:
1
Select the icon of the user or group you want to change.
2
On the toolbar, click Change.
The Change Settings of User dialog box opens
Using the BayStack Instant Internet Management Software Version 7.11
Chapter 2 User access administration
44.
(Figure
55
13).