Ipx Workstation Error Messages; Access Errors - Nortel BayStack Instant Internet 100-S Using Manual

Appendix A Troubleshooting and error messages 309
"Your administrator has restricted access to this site."
The user has attempted to access a site (either by IP address or host name), an
incoming port, or a news group that has been restricted in the either the user
access (time of day, day of week) or in the Internet access controls.
You may also get an access control violation error message if No RAW Sockets
has been specified and you have attempted to ping, trace, or otherwise use ICMP
to access a site.

IPX workstation error messages

This information assists you in interpreting and troubleshooting error messages
workstations see when running third-party applications.

Access errors

Access denied to server [#]
Error 2 indicates the user does not have access to the specified Instant Internet
unit. You can configure the user to access this unit in Admin. For details, refer to
"User access administration" on page 35.
Any other error number indicates a problem with the actual user access file. Make
note of the error number and contact Nortel Networks Technical Support.
Access denied to server [106]
Server access error 106 indicates that version 3.0 workstations are running with a
version 3.1 or 4.0 user/group database. Instant Internet version 6.0 does not
support workstations earlier than version 3.10. You must upgrade your
workstations.
Access restricted to server
Using the BayStack Instant Internet Management Software Version 7.11