Fixed Dialling; Closed User Group; Security Level; Change Access Codes - Nokia 7110 Owner's Manual

•
International calls
bar all calls to abroad when in the
home country
•
International except to
home country
international calls except to calls
to the home country when abroad
•
Incoming calls
incoming calls
•
Incoming calls when
to bar all incoming calls
abroad
when abroad
For each of the above settings you can
select Activate, Cancel, or
(to show barred call types).
status
Within the submenu
you can cancel all call
barrings
restrictions.
Note: When calls are barred,
calls may be possible to certain
emergency numbers in some
networks (e.g. 112 or other
official emergency number).
Fixed dialling (Menu 4-5-3)
You can restrict your outgoing calls to
selected phone numbers, if this
function is supported by your SIM card.
To save and edit numbers on the list,
you need the PIN2 code.
Note: When fixed dialling is set
to on, calls may be possible to
certain emergency numbers in
some networks (e.g. 112 or other
official emergency number).
to
to bar all
to bar all
Check
Cancel all
75

Closed user group

(Menu 4-5-4)
This network service specifies the group
of people whom you can call and who
can call you.
Network default
resets the phone to use a user group the
SIM card owner has agreed upon with
the service provider. A closed user
group is indicated by the icon
Note: When calls are limited to
a Closed user group, calls may be
possible to certain emergency
numbers in some networks (e.g.
112 or other official emergency
number).
Security level (Menu 4-5-5)
This menu allows you to set the phone
security level on to avoid unauthorised
use of the phone. You need the security
code to set the security level. See
"Protecting the phone with the security
code" on page 81.
Note: When you change the
security level, all the recent calls
lists are cleared.
Change of access codes
(Menu 4-5-6)
With this menu you can change the
access codes; security code, PIN code
and PIN2 code. These codes may only
include the characters 0 to 9. The
phone prompts you to enter the current
code and the new code. It also prompts
you to verify the new code.
Settings (Menu 4)
.