Writing Text; Writing Text By Using Navi Roller - Nokia 7110 Owner's Manual

You can enter text (for example, in
phone book or in calendar) by using the
Navi Roller or by using the traditional
text input. The traditional text input is
indicated by . Note that the Navi
Roller in-put is also available; when the
traditional text input is in use.
When using the Navi Roller, you write
text by selecting characters from the
character bar displayed in the far right
of the display. In the traditional text
input, you enter text by pressing a
number key (from

Writing text by using Navi Roller

1. Roll with Navi
Roller to the
desired
character or
number. The
character bar is displayed in the far
right of the display.
2. Press Navi Roller to insert the
highlighted character or number.
• If you make a mistake, you can
remove characters to the left by
pressing Clear as many times as
needed. Pressing and holding Clear
clears the display.
• To move the cursor, roll through the
character bar to one of the arrow

5. Writing text

to )
35
repeatedly until the desired character
appears on the display.
For writing text messages you can also
use the predictive text input. In the
predictive text input you only press a
number key once for one letter. The
predictive text input is indicated by
. Note that this input method
may not be available for all languages.
You can use Chinese input when you
have selected Chinese as the display
text language within menu 4-3-1. For
using Chinese input, see page 41.
symbols and press Navi Roller to
move the cursor in the direction of
the highlighted arrow symbol
You can also move the cursor by
first pressing Options, then pressing
Navi Roller at
Move
with Navi Roller to the desired
location and press Done to move the
cursor.
Writing text
cursor. Roll