Advertisement
U
NIV ERSAL
The USB port is a high-speed port which allows you to connect USB
peripherals, such as a mouse, an external keyboard, additional
storage (external hard disks), or any other compatible device.
Note
Two USB standards are currently available on Acer computers: USB 2.0
(High-speed USB) and USB 3.2 Gen 1 (SuperSpeed USB). USB 2.0 ports on
Acer computers have a black tongue in the port, while USB 3.2 Gen 1 ports
have a blue tongue. For best performance, USB 3.2 Gen 1 devices should
always be plugged into USB 3.2 Gen 1 ports. Consult your device's
documentation to see which standard it supports.
You can also charge devices such as tablets, smartphones, or other
devices through a USB port. Some USB 3.2 Gen 1 ports support
charging devices when the computer is in Hibernate or turned off.
Additionally, you can use a USB hub to connect multiple devices to a
single USB port.
Important
When removing a USB storage device, you should right-click on the
USB icon in the Windows task bar and select "Eject <device>" to tell the
operating system to stop using the device before removing it. Failure to
do this may result in data loss or damage to your peripheral.
S
ERIAL
Universal Serial Bus (USB) - 59
B
(US B )
US
Advertisement
Need help?
Do you have a question about the Swift Go 16 and is the answer not in the manual?
Questions and answers
I can not access the @ symbol when I press the shift key and no. 2 key
The inability to access the @ symbol when pressing Shift + 2 on your Acer Swift Go 16 could be due to the keyboard layout setting. If your keyboard is set to a different layout (e.g., UK instead of US), the @ symbol may be assigned to a different key. To fix this, check and change your keyboard layout in Windows settings:
1. Press Windows key + Space to cycle through installed keyboard layouts.
2. Go to Settings > Time & language > Language & region.
3. Under Preferred languages, select your primary language, then click Keyboard options.
4. Ensure the correct layout (e.g., US QWERTY) is selected.
If the issue persists, try using Alt + 64 on the numeric keypad or check for any software-related conflicts.
This answer is automatically generated