How To Set The Menus - Mitsubishi Electric MH2850U User Manual

Menu operation (continued)

How to set the menus:

Following describe how to set AUTO POWER OFF
time.
1. Press the MENU button.
opt.
IMAGE
2. Press the or button to select a menu to use.
opt.
INSTALLATION
3. Press the ENTER button (or
opt.
INSTALLATION
WALL SCREEN
Available settings in the menus
Set the following items on their relevant menus.
1. IMAGE menu
ITEM
COLOR ENHANCER
CONTRAST
BRIGHTNESS
COLOR TEMP.
COLOR
TINT
SHARPNESS
ADVANCED MENU
NOISE REDUCTION
CTI
INPUT LEVEL
*1: This mode displays images based on the color confi guration close to that of DICOM. (DICOM is a standard medical imaging
format.) Images such as X-ray images are made easy to view.
• Do not use this mode for actual medical diagnosis.
button).
BEIGE
SETTING
AUTO
PRESENTATION
STANDARD
THEATER
sRGB
USER
CLEAR BASE
BLUE BASE
±30
±30
4 options
±10
±10
±5
ON / OFF
ON / OFF
±5
ENHANCED /
NORMAL
4. Press the
AUTO POWER
ON
AUTO POWER
OFF
5. Set the selected item by pressing the
AUTO POWER
ON
AUTO POWER
OFF
To cancel the menu:
6. Press the MENU button several times.
Important:
• When the MENU button doesn't function, unplug
the power cord from the wall outlet. Wait about 10
minutes, plug the power cord in, and try again.
• After selecting the items marked with
ENTER button.
FUNCTION
Select to optimize the settings
automatically depending on the
input signal. (Select this option for
normal use.)
Select to make the displayed
image look bright and crisp.
Select to make the displayed
image look natural.
This option, suitable for viewing
movies, makes the displayed
image look soft and smooth.
Select to give priority to the color
reproducibility.
• When COLOR ENHANCER is sRGB, COLOR TEMP., COLOR, TINT
and WALL SCREEN can't be adjusted.
Select to set the gamma curve or adjust the color intensity or color
balance as desired. (See page 29.)
Select to obtain the color of the X-ray fi lm (clear base)
Select to obtain the color of the X-ray fi lm (blue base)
Use to adjust the contrast of the projected image. (See page 28.)
Use to adjust the brightness of the projected image. (See page 28.)
Use to adjust the color temperature. (See page 28.)
• COLOR TEMP. is unavailable when WALL SCREEN in the INSTALLA-
TION menu is set to other than OFF.
Use to adjust the color thickness of the projected image. (See page 28.)
• When the COMPUTER1, COMPUTER2 or DVI is selected as the input
source, COLOR can't be adjusted.
Use to adjust the color tint of the projected image. (See page 28.)
• When the COMPUTER1, COMPUTER2 or DVI is selected as the input
source, TINT can't be adjusted.
• TINT is available only when the NTSC signal is input.
Use to adjust the sharpness of the projected image. (See page 28.)
Use to reduce noise and roughness in the image when noisy video signal is input.
Use to correct smeared color boundaries.
For analog signal input: The input level of video signal differs among
devices to be connected. High input level causes solid white in displayed
image and low input level causes displayed image to get dark. Use this
menu to adjust the input level of analog video signal.
For digital signal input: When a digital signal is input, ENHANCED and
NORMAL are switchable. (See page 18.)
EN-23
or button to select an item to adjust.
OFF
OFF
OFF
30min
opt.
IMAGE
COLOR
ENHANCER
CONTRAST
BRIGHTNESS
COLOR TEMP.
COLOR
TINT
SHARPNESS
ADVANCED MENU
*1 . (See page 29.)
*1
. (See page 29.)
or button.
, press the
AUTO
0
0
STANDARD
0
0
0
OK