How To Set The Menus - Mitsubishi Electric HC4900 User Manual

Menu operation (continued)

How to set the menus:

The following describes how to set AUTO POWER
OFF time as an example.
1. Press the MENU button.
opt.
IMAGE
2. Press the or button to select a menu to use.
opt.
INS T ALL A TION
3. Press the ENTER button (or
opt.
INSTALLATION
LAMP MODE
Available settings in the menus
Set the following items on their relevant menus.
1. IMAGE menu
ITEM SETTING
GAMMA MODE AUTO
SPORTS
VIDEO
CINEMA
USER1
USER2
CONTRAST
BRIGHTNESS
COLOR TEMP. 5 options
COLOR
TINT
SHARPNESS
ADVANCED MENU
VERTICAL LOCATION
AUTO IRIS 4 options
NOISE REDUCTION ON/OFF
CTI
INPUT LEVEL
ENHANCED /
NORMAL
AV MEMORY SAVE 3 options
• By using the AV memory function, you can save up to 3 setting patterns of IMAGE menu for each input terminal.
(See page 29.)
• INPUT LEVEL is unavailable when the digital signal is supplied from the YC
device.
AV MEMORY 1
A V MEMO R Y 1
button).
AV MEMORY 1
STANDARD
FUNCTION
The proper gamma mode is
automatically selected depending on
the input signal. Default is AUTO.
This is a bright mode suitable for
watching sports images.
This is a standard mode suitable for
watching video images, etc.
This is a mode for watching movies in
dim lighting as in a theater.
/ Select to adjust the gamma curve.
(See page 32.)
±30 Use to adjust the contrast of the
projected image. (See page 30.)
±30 Use to adjust the brightness of the projected image. (See page 30.)
Use to adjust the color temperature. (See page 31.)
±10 Use to adjust the color thickness of the projected image. (See page 30.)
±10 Use to adjust the color tint of the projected image. (See page 30.)
±5 Use to adjust the sharpness of the projected image. (See page 30.)
±26 Use to adjust the position (height) of the projected image.
Select an iris mode depending on the projected image. (See page 31.)
Use to reduce noise and roughness in the image when noisy video signal is
input.
0 - 5 Use to correct smeared color boundaries.
±5 For analog signal input: The input level of video signal differs among devices to
be connected. High input level causes solid white in displayed image and low
input level causes displayed image to get dark. Use this menu to adjust the input
level of analog video signal.
For digital signal input: When a digital signal is input, ENHANCED and NORMAL
are switchable. (See page 16.)
Select the AV MEMORY to which you save the current setting. (See page 29.)
http://www.pureglare.com.au
4. Press the or
adjust.
AUTO POWER
ON
AUTO POWER
OFF
5. Set the selected item by pressing the
button.
AUTO POWER
ON
AUTO POWER
OFF
To cancel the menu:
6. Press the MENU button several times.
Important:
• When the MENU button doesn't function, unplug
the power cord from the wall outlet. Wait about 10
minutes, plug the power cord in, and try again.
• After selecting the items marked with
ENTER button.
1. IMAGE menu
C
B
EN-25
button to select an item to
OFF
OFF
OFF
30 min
opt.
IMAGE AV MEMORY 1
GAMMA MODE AUTO
CONTRAST 0
BRIGHTNESS 0
COLOR TEMP. MEDIUM
COLOR 0
TINT 0
SHARPNESS 0
ADVANCED MENU OK
AV MEMORY
AV MEMORY1
SAVE
/YP P terminal of the connected
R B R
or
, press the