Password Function - Mitsubishi Electric MH2850U User Manual

Advanced features (continued)

Password function

This projector is equipped with the password function
that is designed for prevention of wrong operation by
children and restriction on operation by other than
specifi ed users.
DISPLAY INPUT
When the projector is turned on, the startup screen
(or splash screen) will appear and stay on the screen
until the password is entered. When the password is
entered, the startup screen will switch to the regular
operation screen.
MENU ACCESS
Only the following menus become available.
• COLOR ENHANCER, CONTRAST, and
BRIGHTNESS in the IMAGE menu
• MENU ACCESS of PASSWORD FUNCTION in the
FEATURE menu
• INFORMATION menu
User can control the menus in a very simple way.
SPLASH ID SCREEN
IMAGE CAPTURE and SPLASH SCREEN in the
INSTALLATION menu become unavailable. SPLASH
SCREEN will be set to ON automatically.
To enable the password function:
1. Display the FEATURE menu.
2. Press the or button to select PASSWORD
FUNCTION.
3. Press the or button to change the mode
among DISPLAY INPUT
SPLASH ID SCREEN
• When the password has already been set, the
mode won't be changed. In such cases, press
the ENTER button to cancel the password func-
tion and try again.
4. Press the ENTER button.
• The screen for setting the password function will
appear.
opt.
FEATURE
MENU ACCESS
LOCK
UNLOCK
5. Press the ENTER button.
• The screen for entering a password will appear.
PASSWORD
CONFIRM
1
4 2
3
6. Enter a 4 - 8 digit password using the
button on the remote control as shown below.
( =1, =2, =3,
, MENU ACCESS
.
OK
OK
O K : ENTER CANCEL : MENU
, ,
=4)
7. Press the ENTER button.
• To cancel the procedure, press the MENU
button.
8. Enter the password again for confi rmation using the
same steps.
9. Press the ENTER button.
• If the entered passwords don't match, an error
message will appear.
• To cancel the procedure, press the MENU
button.
To cancel the password function:
1. Display the FEATURE menu.
2. Press the
FUNCTION.
3. Press the ENTER button.
• The screen for canceling the password function
will appear.
4. Press the ENTER button.
• The screen for entering the password will
appear.
and
5. Enter a 4 - 8 digit password using the
button on the remote control as shown below.
( =1,
6. Press the ENTER button.
• If you enter a wrong password, an error message
will appear.
• To cancel the procedure, press the MENU
button.
Important:
• Disable the password by pressing the MENU and
ENTER buttons on the control panel at the same
time about three seconds.
or
EN-33
or button to select PASSWORD
opt.
FEATURE
MENU ACCESS
LOCK OK
UNLOCK OK
PASSWORD
1
4 2
O K : ENTER
3
=2, =3, =4)
CANCEL : MENU
, ,
or