Troubleshooting - Maytag MFC2061HE Use And Care Manual

Troubleshooting

PROBLEM POSSIBLE CAUSES
Ice maker arm is on OFF position.
Ice maker is not
producing ice
Household water supply is not reaching
water valve.
Copper tubing has kinks.
Water pressure is too low.
Check freezer temperature.
Exceeded normal operating
Temp Alarm Light
temperatures.
is flashing
Control has been set to Sabbath Mode.
All lights on
dispenser and
interior lights are
off and appliance
is still running
Alarm mode has been disabled.
Door alarm set, no
alarm sounded
Temperatures in Temperature display has been set to
Celsius rather than Fahrenheit.
display look too low
WHAT TO DO
Confirm ice maker arm is down. See Automatic Ice
Maker, page 16.
See Connecting the Water Supply page 8.
Turn off water supply and remove kinks. If kinks
cannot be removed, replace tubing.
Water pressure must be between 35 to 100 pounds
per square inch to function properly. A minimum
pressure of 35 pounds per square inch is
recommended for refigerators with water filters.
See Temperature Controls, pages 10-12. Freezer
temperature should be between 0° to 2° F (-18° to
-17° C) to produce ice.
See Temp Alarm, pages 11-12.
See, Sabbath Mode, page 12.
To activate audible alarms, refer to pages 11-12.
See Temperature display on page 11.
30