Maytag MFC2061HE Use And Care Manual page 7

Installation
Handles
Note:
If not installed, the handle is located in the
interior of the fresh food section or attached to the
back of your refrigerator.
Remove and discard handle packaging and tape.
Plastic Handle
To Install:
1. The handles are to be oriented
as shown.
2. Align door handle clip with the
door studs.
3. Ensure the large hole in the
mounting clip is positioned
down on both ends of the
handle.
4. Rotate the handle so that the
handle is flat against the door.
5. Grasp the handle firmly and slide
down.
To Remove:
1. Grasp the lower part of the handle
firmly, slide up, lift and remove from
the surface.
Door
Stud
6