Operation - VALBERG WF 612 C W566C Instructions For Use Manual

B
Product usage
1. Get the machine laid on the floor, using some soft material like foam or clothes between
the machine and floor for a protection;
2. Stick the 2x longer sponges to the longer bottom edges of machine, and the 2x shorter
sponges to the shorter bottom edges.

Operation

Quick Start
Caution!
• Before washing, please make sure the washer is installed properly.
• Your appliance was thoroughly checked before it left the factory. To remove
any residual water and to neutralize potential odors, it's recommended to
clean your appliance before first use. For this reason, recommended to clean
the inner drum by running the "DRUM CLEAN" or other program with the
optional temperature of 90°C. Be careful not to put laundry and detergent
in the machine.
Calibration
• It's recommended to calibrate the machine, so that provide the best
performance. The appliance is able to detect the amount of laundry loaded.
This function is optimizing the product performance by minimizing energy
and water consumption, saving you money and time. For this reason it's
recommended to calibrate the appliance for best use.
1. Remove all accessories from the drum and close the door;
2. Insert the mains plug to the socket;
3. Switch on the machine and within 10 seconds, press "Delay" and "Extra Rinse"
simultaneously (normally 3 seconds) until "t19" is displayed;
4. Press [
"***" (such as "126") is displayed to indicate the real time drum speed. If
the machine is successfully calibrated, "PAS" will be displayed, otherwise,
"FAL" will be displayed.
] to start the appliance and wait till "****" is displayed, and then
9 EN