Table of Contents
Advertisement
MS-9228 1U Rackmount Server
Super IO Device
Press <Enter> to enter the sub-menu and the following screen appears:
Onboard Serial Port 1
Select an address and corresponding interrupt for Serial Port 1. The settings
are: [3F8/IRQ4], [2E8/IRQ3], [3E8/IRQ4], [2F8/IRQ3], [Disabled], [Auto].
Power M anagement Setup
Press <Enter> to enter the sub-menu and the following screen appears:
ACPI Function
This item is to activate the ACPI (Advanced Configuration and Power Manage-
ment Interface) Function. If your operating system is ACPI-aware, such as
W indows 98SE/2000/ME, select [Enabled]. Settings: [Enabled] and [Disabled].
Soft-Off by PWR-BTTN
This feature allows users to configure the power button function. Settings are:
3-12
Advertisement
Table of Contents
