MSI Midas 915GM User Manual page 63

Azalia/AC97 Audio Select
Azalia is the codename of "High Definition Audio." This setting allows users to
disable/enable the High Definition Audio interface integrated in ICH6 / ICH6R
southbridge.
Onboard 1394 Device
This setting is used to enable/disable the onboard IEEE 1394 controller. Setting
options: [Disabled], [Enabled].
Super IO Device
Press <Enter> to enter the sub-menu and the following screen appears:
Onboard FDC Controller
Select [Enabled] if your system has a floppy disk controller (FDD) installed on
the system board and you wish to use it. If you install add-on FDC or the
system has no floppy drive, select [Disabled] in this field. The settings are:
[Enabled] and [Disabled].
Onboard Serial Port 1 / 2
Select an address and corresponding interrupt for Serial Port 1/2. The settings
are: [3F8/IRQ4], [2E8/IRQ3], [3E8/IRQ4], [2F8/IRQ3], [Disabled], [Auto].
Onboard Parallel Port
This specifies the I/O port address and IRQ of the onboard parallel port.
Settings: [378/IRQ7], [278/IRQ5], [3BC/IRQ7], [Disabled].
Parallel Port Mode
This setting specifies the parallel port mode.
4-10