MSI Midas 915GM User Manual page 62

PATA IDE Mode / SATA Port
These settings show the modes of the PATA & SATA ports.
Onboard Device
Press <Enter> to enter the sub-menu and the following screen appears:
Onboard LAN 1, Onboard LAN 2, PCI-E X1 Slot
These settings control the onboard LAN 1, LAN 2, and PCI-Express X1 slot
controllers. Please note that when onboard LAN 1 is set to [Disabled], onboard
LAN 2 and PCI-Express X1 slot will be disabled as well.
PCI Slot 1, PCI Slot 2
These settings disable/enable the specified PCI devices.
PCI-E Compliancy Mode
This setting specifies the PCI-Express compliancy mode.
USB Controller
This setting is used to enable/disable the onboard USB controller. Setting
options: [Enabled], [Disabled].
USB 2.0 Controller
This setting is used to enable/disable the onboard USB 2.0 controller. Setting
options: [Enabled], [Disabled].
USB Keyboard/Mouse Support
Set to [Enabled] if your need to use a USB-interfaced keyboard/mouse in the
operating system that does not support or have any USB driver installed, such
as DOS and SCO Unix.
Chapter 4 - BIOS Setup
4-9